Sealing Performance - Globe Thesis

Keyword [Sealing Performance] Result: 81 - 100 \| Page: 5 of 10
81.	Study On Sealing Performance Of Composited Elastic Metal Sealing Ring Used On Aircraft Engine
82.	Performance Study Of Gas-Liquid Two-Phases Hydrodynamic Seal With High Speed
83.	Numerical Simulation And Experimental Study Of Metal C-ring For Reactor Pressure Vessel
84.	Research On The Sealing Performance Of The Metal Lens Gaskets
85.	The Influence Of Surface Topography Of Hydrodynamic Groove On Sealing Performance Of Dry Gas Seal At Mid-low Speed
86.	Study On The Performance Of Spiral Wound Gasket Based On Leak Rate
87.	Study On Optimization Of Mechanical Seal Performance Of Pump Based On Temperature Field Analysis
88.	The Numerical Analysis And Experimental Study Of Thermal Characteristics Of Structure For Side-entry Single Mechanical Seals
89.	Improved High-temperature Stainless Steel Flange Sealing Performance
90.	Research On The Sealing Performance Of The Bolted Flange Joints Under The Dynamic Loads
91.	Sealing Performance Analysis And Optimization Of High-pressure Metal Hardsealing Fixed Ball Valve
92.	Research On NC Machining Technology Of Vertical Plate Three Eccentric Metal Sealing Butterfly Valve
93.	Sealing Performance Research Of Cryogenic Ball Valve And Thermal-mechanical Coupled Analysis
94.	Safety Seal Performance Analysis Of Bolt Flange Joint
95.	Analysis Of Sealing Performance Of 4HS-MG Labyrinth Compressor And Research On Seal Teeth Optimum Structure Design
96.	The Structure Design And Sealing Performance Of Muti-diameter Nodular Cast Iron Type Test Device
97.	Structure Simulation And Optimization Of Sealing Performance Of Metal C-ring With Built-in Spring
98.	Research On Main Sealing Performance Of High Pressure Aircraft Actuator
99.	Sealing Performance Assessment And Failure Analysis Of Flange Connection System With Octagonal Ring Gasket
100.	Performance Analysis Of MMC Gasket And Calculation Of Bolt Pre Tightening Force
<<First <Prev Next> Last>> Jump to