Keyword [Modeling analysis]
Result: 161 - 180 | Page: 9 of 10 |
| 161. | Modeling Analysis And Simulation Research Of Transmission System Based On CRUISE |
| 162. | Analysis And Simulation Research On Typical Movement Process Of Ship Block Lifting |
| 163. | Optimal Design Of Wireless Power Transfer System Via Magnetic Resonances Coupling |
| 164. | Modeling Analysis Of Power System Cascading Failure Considering Typhoon And Communication Factors |
| 165. | Study On Splicing Method Of New And Old Hollow Slab Beam In Reconstruction And Extension Of Expressway |
| 166. | Research On The Detection Method And Equipment Development Of The Inner Raceway Of The Slider Based On Multi-point Laser Measurement |
| 167. | Modeling, analysis and control of DC hybrid power systems |
| 168. | Structural modeling, analysis, and instrumentation of the Maurice J. Tobin Memorial Bridge |
| 169. | Modeling, analysis, and control of a hypersonic vehicle with significant aero-thermo-elastic-propulsion interactions, and propulsive uncertainty |
| 170. | Modeling, analysis and experiment for building ice parts with supports using Rapid Freeze Prototyping |
| 171. | Modeling, analysis and control of fuel cell hybrid power systems |
| 172. | Modeling, analysis and non-linear control of a novel pneumatic semi-active vibration isolator: A concept validation study |
| 173. | Distribution System Modeling, Analysis and Design with High Penetration of Photovoltaic Generation |
| 174. | Modeling, analysis, and control of a PEM fuel cell based micro-grid power system |
| 175. | Multiscale Modeling, Analysis and Simulation in Multiphase Systems |
| 176. | Modeling, Analysis and Optimization of Integrated Energy Systems for Multigeneration Purposes |
| 177. | Modeling, analysis and control of voltage-source converter in microgrids and hvdc |
| 178. | Modeling, analysis, control and design application guidelines of Doubly Fed Induction Generator (DFIG) for wind power applications |
| 179. | Modeling, analysis and control of nonlinear switching systems |
| 180. | Modeling, analysis and design considerations for brush seals used in turbomachinery |
|
