MicroChannel - Globe Thesis

Keyword [MicroChannel] Result: 161 - 180 \| Page: 9 of 10
161.	Boiling Heat Transfer Enhancement Study For Micro-/nano-structure Modified Surfaces In Rectangular Narrow Microchannels
162.	Flow Regime And Pressure Drop Of Refrigerant Condensation In Microchannel Arrays
163.	Structural Design And Study On Performance Of Flow And Heat Transfer Of Complex Microchannel Heat Exchanger With Reentrant Cavitives
164.	Experimental And Numerical Studies Of Flame Propagation And Stability In Microchannels
165.	Study On Heat Transfer Enhancement With Typical Non-newtonian Fluid In Microchannel
166.	Enhanced Flow Boiling Heat Transfer Of Micro/Nano-scale Surfaces In Different Geometric Microchannel
167.	Study On Boiling Heat Transfer Characteristics Of Surfactant-modified Nano-refrigerants In Microchannel
168.	Research On The Microchannel Heat Dissipation System Of High Power LED Street Lamp
169.	Experimental Investigation Of Pool Boiling Heat Transfer Characteristics On Microchannel With Porous Medium Composite Structure
170.	Experimental Investigation On Separate Gravity Heat Pipe With Microchannel Heat Exchangers
171.	Convection Heat Transfer Characteristics Of Microencapsulated Phase Change Material Suspension In Microchannel Heat Exchanger
172.	Numerical Simulation And Experimental Test Of Convective Heat Transfer Characteristics In Microchannel Evaporator
173.	Numerical Simulation And Analysis Of Gas Flow And Heat Transfer In Microchannel
174.	Research On Thermal Performance Of Microchannel For Electronic Device Cooling
175.	Study On Heat Transfer Performance Of Single-phase And Two Phase Flow In A Throttle Microchannel
176.	Experimental Study On The Flow Boiling Heat Transfer In An Open Microchannel
177.	Theoretical And Experimental Study Of Distribution Characteristics In Microchannel Parallel Flow Heat Exchanger And Its T-Juction Tube
178.	Performance Analysis And Heat Dissipation Characteristics Research On Thermoelectric Generator Under High Dynamic Heat Flux
179.	Study On Pressure Drop Characteristic And Flow Separation Of The Reduced T-junction With Microchannel Flat Tube
180.	Studying On Leakage Model Of Contact Mechanical Seal Considering The Effect Of Surface Wettability
<<First <Prev Next> Last>> Jump to