Machine Parameter - Globe Thesis

Keyword [Machine Parameter] Result: 1 - 20 \| Page: 1 of 2
1.	The Study Of Parameter Measure Equipment For Synchronous Machine Based On Micro-computer
2.	The Study On Electromagnetism Construction Analysis And Simulation Of Brushless Double-Fed Machine
3.	The Monitoring Study On The Major Operating Parameters Of Electrical Machine
4.	Research On Off-line Identification Of Induction Machine Parameter
5.	Study On The Test Of Vibratory Compaction For Cement Stabilized Gavel
6.	Classifying Rarely Used Spare Parts Based On SVMs
7.	Parameter Optimization And Adaptive Control Of Vibration Hammer
8.	Based On The Development Of The Virtual Instrument Air Dc Motor Performance Testing System
9.	The Analysis Of10KW Wind Turbine Entire Machine Based On Fluid-solid Coupling
10.	Research On A Dual-three-phase Fault-tolerant Permanent Magnet Synchronous Motor
11.	Analysis On Support Optimization And Reliability In Expansion Excavation Of Extra-large Section And Small Interval Tunnels From Two To Four Lanes
12.	Modeling And Parameter Identification Of Synchronous Machine Including Magnetic Saturation
13.	Application Of Particle Swarm Optimizer And Support Vector Machine In Ship Structural Optimization
14.	Design And Application Of XM120F Milling Machinestructure And Hydraulic System
15.	Simulation Study On Rock Breaking Mechanism Of The New Multi Arm Jumbo Drill
16.	The Design And Implementation Of Lithium Battery Formation Quality Evaluation And Intelligent Screening System
17.	Study On Prediction Model Of Electric Power Communication Flow Based On Wisdom City
18.	Research And Application Of Short-term Traffic Flow Forcasting Based On Support Vector Machine Regression
19.	Fault Diagnosis For Steam Turbine Rotor By Using Support Vector Machine Based On CS-BBO Optimization Algorithy
20.	Parameter Estimation Of Ipmsm Based On Affine Projection Algorithm
<<First <Prev Next> Last>> Jump to