Layer Separation - Globe Thesis

Keyword [Layer Separation] Result: 21 - 39 \| Page: 2 of 2
21.	The Effect Of Upstream Wake On Aerodynamic Performance Of Low Pressure Turbine Blades
22.	Numerical Simulation And Experimental Research On The Influence Of Micro-characteristics Of Molding Room On The Characteristics Of Solidification
23.	Numerical Study On The Effect Of Different Blade Tip Geometry On Compressor Rotor Performance
24.	Study On The Mechanism Of Active Jet Suppressing Cavitation On The Hydrofoil
25.	Theoretical analysis of control mechanisms for boundary layer separation on rotocraft blades
26.	URANS for unsteady free surface wave-induced boundary layer separation
27.	Plasma actuation for boundary layer separation control in engine ducts
28.	A numerical and experimental study of the effects of dynamic roughness on laminar leading edge separation
29.	Experimental examination of the flow near the leading edge of an attached cavity
30.	Investigation On The Organization Method Of Passage Shock Wave And Control Of Leading-Edge Passage Shock Wave/Boundary-Layer Interaction Within “Shock-in-Type” Supersonic Compressor
31.	Endwall Flow Separation And Stall Control Strategies In Axial Compressor
32.	Optimization Of Steam Ejector Nozzle Structure And Operating Parameter
33.	Investigation On The Typical Structure Of Internal Flow Field And Pumping Performance Of Steam Ejector
34.	Mechanism Investigation On The Effect Of Wake Shape On Flow Of High-load Low-pressure Turbine
35.	The Influence Mechanism Of Unsteady Wakes On The Down Stream Turbine Cascades Flow
36.	Effect Of New Type Vortex Generator On The Aerodynamic Performance Of Wind Turbine Blade Airfoil
37.	Seismic Performance Analysis Of Damping Infilled Frames Based On Separation Modeling
38.	Flow Control Mechanism Of Low-pressure Turbine By Dielectric Barrier Discharge Plasma Actuator
39.	Study Of The Effect Of Smoke Shaft Inclination On The Thermal Stratification And Movement Of Smoke From A Shaft Tunnel Fire
<<First <Prev Next> Last>> Jump to