Installed - Globe Thesis

Keyword [Installed] Result: 141 - 160 \| Page: 8 of 9
141.	Study On Mechanical Performance Of Anchor Plate Under The Combined Action Of Tension And Moment
142.	Study On Mechanical Performance Of Post-installed Anchorage System Between Ballastless Track
143.	Instrumentation and monitoring of a full-scale shaft seal installed at Atomic Energy of Canada Limited's Underground Research Laboratory
144.	Strengthening existing steel bridge girders by the use of post-installed shear connectors
145.	Shear behavior of select post-installed mechanical concrete fasteners
146.	An Equivalent Circuit for the Thermal Analysis of Power Cables Installed in Solid Bottom Trays
147.	Energy balance, water balance, and plant dynamics of a sloped, thin extensive green roof installed in the mid-Atlantic region of the United State
148.	Effects on a wedge flowmeter installed downstream of a double elbow out of plane
149.	The performance of identity through the design of grave memorials installed between 1850--1920 in St. Peter's Roman Catholic Cemetery, Peterborough, Ontario, Canada
150.	Adaptive nonlinear optimization methodology for installed capacity decisions in distributed energy/cooling heat and power applications
151.	Effect on Speed Distribution due to Intrusive and Non-Intrusive Portable Speed Measurement Devices
152.	Installed base opportunism and the efficiency of the United States antitrust laws
153.	Noise from the fine scale turbulence of jets in forward flight, nonaxisymmetric jets and installed jets
154.	Performance characteristics of a rapidly installed breakwater system
155.	Investigation of dynamic behavior of power system installed with STATCOM
156.	Condition assessment of installed timber piles and comparison of three transform techniques using stress wave method
157.	Comparing the Fourier phase and short kernel methods for finding the overall lengths of installed timber piles
158.	Experimental study and finite element analysis of drivability and static behavior of various piles installed by vibratory driving
159.	The effect of exhaust plume/afterbody interaction on installed scramjet performance
160.	The propulsive characteristics of a cross flow fan installed in an airfoil
<<First <Prev Next> Last>> Jump to