Injectors - Globe Thesis

Keyword [Injectors] Result: 1 - 20 \| Page: 1 of 4
1.	The Design Of The Power Supply For The Acceleration Grids Of The Neutral Beam Injectors Of The EAST TOKAMAK Based On PSM Technology
2.	Study On The Hydrodynamic Characteristics Of Small Type Water-fire Tube Hot Water Boilers
3.	A Numerical Study On The Process Of Cavitation And Gas-Liquid Two Phase Flows In Fuel Injectors
4.	Research On The Flow Process And Flow Characteristics Of Nitrous Oxide Injectors
5.	On-line Inspection System Of Reversed Fitting Defect On Pinhead Of One-off Injectors
6.	Research Of The Drive Circuits And Spray Characteristics For GDI Injectors
7.	Failure Analysis On Leaking-oil Of Diesel Engine Injectors
8.	Beam Dynamics Design And Research Of The Linac Injectors In HIRFL
9.	Investigation On Design Parameters Optimization Of The Low Inertial Common Rail Injector With Zero Static Leakage
10.	Experimental Study On Swirl Characteristics Of The Low Swirl Injectors
11.	Research On On-line Monitoring Of Automatic Filling System About Missile Fuel By LabVIEW
12.	Fuel Spray Characteristics Of Different Types Of Injectors Through Visualization
13.	Research On The Drive And Control System Of The Piezo Injector For High-pressure Common-rail
14.	Study On The Atomization And Combustion Characteristics Of LOX/Methane Pintle Injectors
15.	Simulation Study Of Pressure Boundary Conditions On Cavitating Flow Characteristics In Diesel Injectors
16.	Research On The Influence Of Nozzle Geometrical Deviations On The Atomization Characteristics Of Fuel Injectors
17.	Study On The Spray Characteristics Of Fouled Injector And Formation Mechanism And Suppression Measures Of Injector Deposits In Gasoline Direct Injection Engines
18.	Experimental Investigation Into The Effect Of The Injector On The Performance Of A Pilot-ignited Natural Gas Engine
19.	Numerical Study On Spray&Combustion Characteristic Of Marine Engine Injectors In A Constant Volume Chamber
20.	Study On The Atomization Tests And Combustion Characteristics Simulation Of Air-Heater Pintle Injectors
<<First <Prev Next> Last>> Jump to