Hot-stamping - Globe Thesis

Keyword [Hot-stamping] Result: 61 - 80 \| Page: 4 of 5
61.	Investigation Of Crashworthiness For Hot Stamping Thin-wall Structure Considering Damage
62.	Experimental Study On Hot Stamping Process Of Boron Steel B1500HS For U-Shaped Part
63.	Study On Parameters Optimization For Hot Stamping Of The A Pillar Reinforced Plate
64.	Resistance Heating Experiment Of High Strength Steel And Mould Design Of Torsion Beam
65.	Investigation On The Local Partitioning Treatment Of Hot Stamping Parts Of High Strength Steel Sheet
66.	Research And Application Of Temperature-Controlled Gradient Phase Transformation Hardening Pattern For Ultra-High-Strength Steel
67.	Optimization Of Quenching Parameters For Hot Stamping Of A-pillar Reinforcement
68.	Servo Hot Stamping Process And Property Regulation Of High Strength Aluminum Alloy Automotive Parts
69.	Optimization Design Research Of Cooling System For Hot Stamping Die Based On Numerical Simulation
70.	Research On The Hot Stamping Process Of A Drive Axle Housing
71.	Research On Structural Optimization Design And Forming Test Of A Novel Seat Bracket For A Pure Electric Bus
72.	Design?Fabrication And Test Of Microstructure Fresnel-pressed Prisms
73.	Structural Optimization Of High-strength Steel Front Anti-collision Beam And Simulation Of Hot Stamping-quenching Process
74.	Research On Constitutive Relationship And Heat Transfer Coefficient Of 6063 Aluminum Alloy In Thermoforming Process
75.	Study On The Mechanical Trimming Technology Of Hot Stamped Part And The Design Of The Cutting Edge
76.	The Effect Of Temperature On The Springback Of High Strength Steels After Hot Stamping
77.	Study On The Influence Of Cooling Waterway Design On Fatigue Life Of Hot Stamping Die
78.	Study On The Hot-press Forming Process Of 7075 Aluminum Alloy Sheet
79.	Study On Numerical Simulation, Microstructure And Properties Of Tailored Hot-stamped U-shaped Parts Based On Temperature Field Control
80.	Design Of Torsion Beam And Analysis Of Formability In Hot Stamping
<<First <Prev Next> Last>> Jump to