Groove structure - Globe Thesis

Keyword [Groove structure] Result: 21 - 40 \| Page: 2 of 3
21.	Oil Film Shear Cavitation And Transmission Performance Of Hydro-viscous Clutch
22.	Structural Design And Performance Analysis Of Porous Radial Gas Bearing
23.	Study On The Groove Structure Characteristics Of Piston Surface Of Axial Piston Pump
24.	Lubrication Characteristics And Structure Optimization Of Water-Lubricated Bearing Under Multi-field Coupling
25.	Study On Dynamic Distribution Of Particles In The Pipe Groove Under Gas-solid Two-phase Condition
26.	Heat Transfer Performance And Structure Optimization Of The Plate Micro-channel Pulsating Heat Pipe
27.	Research On The Analysis And Suppression Measures Of The Electromagnetic Noise Of A Certain Type Of High-speed Permanent Magnet Synchronous Motor
28.	Simulation And Comprehensive Optimization Of Surface Structure Of Wet Clutch Friction Plate
29.	Research On Heat Transfer Characteristics And Optimization Design Of Vapor Chamber Hot Plate
30.	Study On Film Cooling Characteristics Of Gas Tubine With Fillet Cross Groove Structure
31.	Lubrication Characteristics And Temperature Field Of Water Lubricated Rubber Bearings
32.	Preparation Of High-aspect-ratio Hydrogen Atomic Clock Collimator And Its Performance Test
33.	Performance Analysis Of Piston Ring And Optimization Design Of Shallow Groove Structure On End Face
34.	Study On The Influence Of The Sealing Ring Structure On The Sealing Performance Of New Type Of Sealing Device
35.	Research On The Optimization Of Bridge Expansion Joint Slot Structure And The Preparation Of High Performance Concrete
36.	Research On Flow Field Characteristics Between Friction Plates Based On CFD Of Wet Clutch And Its Optimized Design
37.	Study On The Influence Of Throttle Groove Structure Parameters On The Flow Force Of Throttle Groove Slide Valve
38.	Static-Dynamic Characteristics Analysis Of Proportional Valve With Pilot Control By The High-Speed Switching Valve Bridge
39.	The Effect Of Groove And Ridge Structures On The Dynamic Characteristics Of Cavity Collapse
40.	Noise Impact Of V-Groove Structure On NACA0012 Pump Blade
<<First <Prev Next> Last>> Jump to