Elevated temperatures - Globe Thesis

Keyword [Elevated temperatures] Result: 41 - 60 \| Page: 3 of 5
41.	Mechanical Characterization Of Steel/CFRP Double Strap Joints At Elevated Temperatures And Its Numerical Simulation Study
42.	Experimental Study On Macroscopic Spray Characteristics Of Diesel At The Elevated Temperatures And Back Pressures
43.	Experimental Study On Uniaxial Tension Performance Of Steel Fiber Reinforced Mortar Exposed To Elevated Temperatures
44.	Effects of optimized and sub-optimum two degree of freedom lining tolerances on modeled inlet acoustic attenuation and Normal incidence impedance measurement at elevated temperatures
45.	Strength of transverse fillet welds at elevated and post-elevated temperatures
46.	Hypervelocity impact damage response and characterization of thin plate targets at elevated temperatures
47.	Damage mechanisms and repairability of high strength concrete exposed to elevated temperatures
48.	Behavior analysis and characterization of a tooling material at elevated temperatures
49.	The effects of elevated temperatures on the residual properties of externally-bonded fibre reinforced polymer systems for concrete
50.	Composite polymer membranes for proton exchange membrane fuel cells operating at elevated temperatures and reduced humidities
51.	An experimental investigation into the behavior of concrete elements rerofitted with NSM composite strips at elevated temperatures
52.	Flexural behaviour of fibre reinforced polymer strengthened reinforced concrete beams at elevated temperatures
53.	Evaluation of Short Term Aging Effect of Hot Mix Asphalt Due to Elevated Temperatures and Extended Aging Time
54.	Dynamic properties of concrete and fiber reinforced concrete at room and elevated temperatures
55.	Liquid jets in subsonic airstream at elevated temperatures
56.	I. A modified k - epsilon turbulence model for high speed jets at elevated temperatures. II. Modeling and a computational study of spliced acoustic liners
57.	Behavior of fluidized beds at elevated temperatures and coal combustion on fluidized beds
58.	Fretting fatigue of anisotropic materials at elevated temperatures
59.	Flame acceleration and deflagration-to-detonation transition studies in fuel-air mixtures at elevated temperatures and pressures
60.	A Device for Measuring Thermal Conductivity of Molten Salt Nitrates at Elevated Temperatures for Use in Solar Thermal Power Applications
<<First <Prev Next> Last>> Jump to