Font Size: a A A
Keyword [Cylinders]
Result: 121 - 140 | Page: 7 of 10
121. Research And Simulation Of Mechanical Prestressed Autofrettage Technique Of Ultrahigh Pressure Thick-walled Cylinders
122. Experimental Study On The Characteristics Of Flow-induced Motion Of Cylinders With Different Cross-section
123. Analysis Of Heat Leakage Of Liquefied Natural Gas Cylinders For Vehicles By FEM And Experiment
124. 9 Cylinders Radial Piston Compressed Air Engine Design
125. Numerical Investigation On The Mechanisms Of Flow-induced Vibration Of Circular Cylinders
126. The Design Research Of Series Cylinders Deceleration Buffer Structure
127. Research On The Winding Layer Stress Damage Mechanism Of CNG-2 Type Cylinder
128. Study On Contact Fatigue Between Cylinders And Plates Based On Finite Element Method
129. The Design And Research On A Hydraulic Servo Cylinder With High Frequency And Hydrostatic Bearing
130. Study And Application Of Intelligent Inspection System For Cryogenic Insulated Cylinders
131. Research And Development Of Large Volume Liquefied Natural Gas Cylinder Used In Truck
132. Study On Wind Pressure Distribution And Aerodynamic Interference Of Three Cylinders In Tandem Arrangement
133. Nusselt Number,force And Strouhal Number Variations From Square To Circular Cylinders At A Low Reynolds Number
134. The Research On Flow Past Cylinders Based On Improved IB-LBM
135. Study Of Characteristic Of Transient Fluid-structure Interaction Of Structures With Airbags Slamming
136. Research On The Remanufacture Repair Technology For Engine Cylinders
137. Research On Inspection Of Fiber-wrapped Reinforced Composite Cylinders With Metal Liner Used For Automotive Vehicles
138. Creep Behaviour Of Cylinders Made Of Normal-strength DCLs And High-strength FC And Stub Steel Columns Filled With Normal-strength DCLs And High-strength FC
139. Application Of Geopolymer In Strengthening Axial Compression Plain Concrete Cylinders And Research On Durability Of Geopolymer Mortar
140. Research On The Application Of Acoustic Emission Technique In The Inspection Of Ring Winding Cylinders
  <<First  <Prev  Next>  Last>>  Jump to