Font Size: a A A
Keyword [Cylinder liner]
Result: 101 - 120 | Page: 6 of 9
101. Characteristic Information Extractiontechnology Research Of Cylinder Liner-piston Ring Acoustic Emission
102. Investigation Of Bonding Ability Between Al Alloy Cylinder Block And Iron Cylinder Liner For Diesel-Engine
103. Mechanism Research On Impact Of Cylinder Liner Surface Parameters On Lubrication Performance And Oil Evaporation Consumption
104. Oil Film Thickness Measurement And Lubrication Analysis Of Cylinder Liner And Piston Ring Of The Opposed Piston Opposed Cylinder Engine
105. Improvement And Verification Of Cylinder Lubrication Model Considering Structural Dynamic Deformation
106. Study On Preparation Technology And Cutting Performance Of Engine Cylinder Liner By Centrifugal Casting
107. Analysis Of Lubrication And Seal Characteristics Of Piston Ring-Cylinder Liner System
108. Research On Anti-scuffing Performance Of Circular Micro-texture Surface On Cylinder Liner
109. Research On The Mechanisms Of Nano-Lubricants For Improvement Of The Heat Transfer And Lubrication Property Under The Condition Of Hydrodynamic Lubrication Of Piston Set-cylinder Liner
110. The Basic Experimental Research Of Nano-lubricants For Improving The Lubrication And Friction Properties Of Piston Ring And Cylinder Liner Of Internal Combustion Engine
111. Research On Cylinder Liner Defects' Detection Technology Based On Compressive Sensing
112. Modeling And Experimental Study On Friction Reduction Of Internal Combustion Engine Liners By Vibrations
113. Investigation Into The Dynamic Lubrication Modeling And Friction Measuring Between The Piston And Cylinder Liner
114. Friction Lubrication State Identification And Fault Monitoring Of Internal Combustion Engine Based On Acoustic Emission(AE) Technology
115. Research On Deformation Of Dry Cylinder Liner Of Non-road High Pressure Common Rail Diesel Engine
116. Preparation And Friction And Wear Properties Of Plasma Sprayed Remanufactured Coatings For Locomotive Cylinder Liners
117. Friction Behavior Of Micro Dimples Filled With MoS2 On Alloy Plated Cylinder Liner Surface
118. Surface Shaping Treatments And Effect On Friction And Wear Properties Of High-Silicon Aluminum Alloy Cylinder Liner
119. Research On The Multi-scale Mixed Lubrication Model For The Cylinder Liner-piston Ring Pack And Prediction Method Of Surface Topography Evolution
120. Research On The Lubricant Oil Transportation And Lubrication Between The Piston Assembly And The Cylinder Liner Of Internal Combustion Engines
  <<First  <Prev  Next>  Last>>  Jump to