Contact angle - Globe Thesis

Keyword [Contact angle] Result: 101 - 120 \| Page: 6 of 8
101.	Experiment Study On Ice Coating Performance Analysis And Effect Evaluation About Coating Method Remove Ice And Snow
102.	Study On Boiling Condensation Characteristics Of Superhydrophilic Hydrophobic Composite Surface Based On LBM Method
103.	Study On Tire Force Estimation Method Of Intelligent Tires By Using Flexible Ring Model
104.	Study On The Characteristics Of Flow And Heat Transfer By Droplet Flow On The Surface Of Micro-Nano Structure
105.	Experimental Study On Wettability And Heat Transfer Characteristics Of Liquid Falling Film Evaporation In A Vertical Tube
106.	Study On Soil-Water Characteristic Curve Of Hunan Clay And Its Hysteretic Effect In Full Suction Range
107.	Experimental Study Of Bead-like Condensation On The Surface Of Columnar Structures At The Micrometer Scale
108.	A Unified Numerical Model for Pool Boiling Curve with Parallel Computin
109.	Impact of surface tension on microchannel two-phase flow
110.	Experimental and computational analysis of reduction in fouling by low energy surfaces
111.	Micro/nanoscale friction and application of surface wettability in MEMS
112.	Experimental Study of Meniscus Thin-Film Evaporation in a Horizontal-Tube, Falling-Film Heat Exchanger, Focusing on Dynamic Contact Angle Variation of an Advancing Meniscus
113.	Development of testing protocols for direct measurements of contact angles on aggregate and asphalt binder surfaces using a sessile drop device
114.	Important parameters affecting critical heat flux from horizontal cylindrical heaters in saturated pool boiling
115.	Investigation of the effect of geometry and surface properties on water buildup in PEM fuel cell gas channel corners
116.	Experimental study in enhanced design of boiling surface used in jet impingement cooling and a complementary theoretical analysis for fully developed nucleate boiling
117.	A new correlation for the critical heat flux from horizontal cylinders in saturated pool boiling
118.	A study on the use of a carbon - titanium diboride composite in a drained cathode aluminium reduction cell
119.	Study On Regulation Of Hydrophilic Properties Of Metal Surface Modified By Peptides
120.	Numerical Simulation And Experimental Study On Heat And Mass Transfer Of Microchannel Gas-liqud Two-phase Flow Based On Diffuse Interface Method
<<First <Prev Next> Last>> Jump to