Compression - Globe Thesis

Keyword [Compression] Result: 161 - 180 \| Page: 9 of 10
161.	Pulse Modulation Technology Of Repetitive Frequency Pulse Power Source Based On Solid State Switch And Its Application
162.	Thermocompression Dynamic Recrystallization Behavior Of V - 5Cr - 5Ti Alloy
163.	Research On Behavior Of Pile Shaft Compression And Settlement Deformation Of Pile Group Foundation Under Vertical Load
164.	Research On Comprehensive Power Quality Detection And Analysis Systems
165.	Cylinder Injection Of Co <sub> 2 </ Sub> On The Compression-ignition Diesel Quasi-homogeneous Combustion Research
166.	Analysis On Compression Performance And Study On Bearing Capacity For RC Composite Circular Column Subjected To Secondary Load
167.	Optical Diagnostics On HCCI Inhomogeneity And Biofuels Low Temperature Combustion
168.	Studies On Effects Of Super-deep Excavation On The Bearing Capacity And Settlement Behavior Of Compression Piles Beneath The Basement
169.	Research On Key Technologies Of Expressway Safety Early-warning System Based On Traffic Flow Theory
170.	Theoretical And Experimental Study On BFRP-Concrete Structure
171.	Research On Key Technologies In Packaging For Micro Direct Methanol Fuel Cell
172.	Mechanism Model And Experimental Investigation Of Chamber Pressure Control For Earth Pressure Balance Shield
173.	A Fundamental Investigation On Chemical Kinetic Models Of HCCI Combustion For Gasoline Surrogate Mixtures
174.	Research On Curved Compression System In Supersonic/Hypersonic Non-uniform Inflow
175.	Research On Key Technologies And System For Vibration Data Compression Of Rotary Machines Based On Speech Coding
176.	Unequal Bearing Capacity Design Method Of CFG Pile Composite Foundation
177.	Experiment On Diesel Engine With Intake Premixed Methanol And Simulation Of Air/Methanol Mixture Formation
178.	Study Of Modal Parameters Identification And Measurement Methods In Space Structures
179.	Study On Performance Of Concrete Filled Steel Tube With Outer Steel Reinforced Concrete Stub Columns Under Pression
180.	Stress-strain Relation Model And Failure Criterion Of Plastic Concrete Under Compression
<<First <Prev Next> Last>> Jump to