Font Size: a A A
Keyword [Cold]
Result: 1 - 20 | Page: 1 of 10
1. Study On The Indoor Thermal Environment In Summer For Residential Buildings In The Cold Zone
2. Investigation Of Aft-End Internal Flows In Solid Rocket Motors With Submerged Nozzle
3. The Study On Thermal Stress And Temperature Cracks Control Of Roller Compacted Concrete Gravity DAM In Severe Cold Area
4. Optimum Study On The Mini-Cold Storage
5. The Research On Climatic-active Design Strategy Of Building Skin In Hot-summer And Cold-winter Zone
6. Studies On Vacuum Pre-cooling Processes Of Fruits And Vegetables And Characteristics Of Water Catcher
7. Numerical Simulation And Experimental Study On Dynamic And Combustion Characteristics Of 410T/H Six-corner Tangential CWS And Oil Boiler With A High Length-width Ratio
8. Study On Heat Transfer Characteristics Of Ice-on-Coil Design Of Cold Air Distribution System
9. Theoretical And Experimental Research Of Cold-formed Steel Residential Building Wall Stud System Subject To Centric Axial Loads
10. Investigation Of Heat Pump-Cold Storage Heat Rejection System For Space Stations
11. Architecture And Climate
12. Study On Mechanical Charateristics Of Rock At Low Temperature, Damage Due To Freezing And Thawing And Mutiphysical Coupling Problems Of Rock In Cold Regions
13. Study On Multi-circuit Cycle Refrigerator-freezer
14. Studies Of Online Monitoring Of Pressure In Vacuum Interrupters
15. Experimental And Theoretical Study On Distortional Buckling Of Cold-Formed Thin Wall Steel Lipped Channel Columns Under Compression
16. Analysis Of Damage Tests And Water-Heat Transfer For Adjoining Rock Around The Tunnels In The Cold Region
17. Study On Consolidation Settlement And Stability Of Wetland Soft Soil Foundation In The Cold Region
18. Study On Applicability Of Flexible Pavements With Asphalt Treated Base In Frigid Region
19. Study On Automobile Air-conditioning System Applying The Cold Energy Of Green Auto Fuel-Liquefied Natural Gas
20. Experiment And Numerical Simulation Of NOx Reduction By Natural Gas Reburning
  <<First  <Prev  Next>  Last>>  Jump to