Font Size: a A A
Keyword [Bearingcapacity]
Result: 81 - 100 | Page: 5 of 6
81. Strengthening And Widening Splicing Technology Research On Shi’an Expressway Precast Girder Bridge
82. Bearing Capacity Of Corroded Reinforced Concrete Beams And Finite Element Simulation
83. Long-span Composite Floor RHS Truss Optimization Analysis Based On The Cross Section Under The Optimal Combination Coefficient
84. Study On The Performance Of CFST Columns Under Blast Loading And Axial Compression
85. Analysis For Seismic Performance Of Abnormal Joints With Variable Cross-Section Column And Column Effective Lengh In Steel Frame
86. Type-selection Of Cone Cylindrical Foundation In Permafrost Areas At High Altitudes And Finite Element Analysis
87. Study On Load Bearing Capacity Of Retaining Wall Of Collapse Loess Foundation
88. Research On The Size Effect Of Single Pile Under Lateral Load
89. Influence Of Creep On The Ultimate Bearing Capacity Of Concrete Filled Steel Tubular Arch Bridge
90. Key Mechanical Properties Analysis And Research Of Concrete-filled Steel Tube Arch Bridge
91. Study On Control Load Of Large-scale Transportation On Conventional Bridge
92. Analysis On Stability Bearing Capacity Of Scaffolding System Of Frame Scaffoldings With Steel Tubes
93. Nonlinear Analysis Of Multiplanar Tubular Gap KK-joints Made Of Square Chord And Circular Braces Based On Finite Element
94. Research On Ultimate Bearing Capacity Of K-joints With Rectangular And Circular Tubular With Plate
95. PVA Fiber Tailings Cement Based Composite Materials Mechanics Analysis Of Reinforced Concrete Beam
96. Studies On The Anti-uplift Behavior Of The Suction Caisson In Saturated Sand
97. Experimental Study On Axial Compressive Behavior Of Large Scale RC Columns Confined By Pre-stressed CFRP Sheets
98. Numerical Modelling Analysis On Filled PHC Pipe Pile With Reinforcement Ring Under Horizontal Cyclic Loading
99. Research On Axial Load Behavior Of CFT Columns With Inner GFRP Tube
100. Statistical Characteristics Of High Formwork Support’s Ultimate Bearing Capacity And A Design Method Based On Reliability
  <<First  <Prev  Next>  Last>>  Jump to