Font Size:
a
A
A
Keyword [ASTM]
Result: 21 - 36 | Page: 2 of 2
21.
Effect of fly ash on the optimum sulfate of Portland Cement
22.
Mixed-mode loading analysis on the lap shear specimen test per ASTM D1002
23.
The implementation of fly ash as a stabilization device in clay soils
24.
Installation behaviour of ASTM F1852 twist-off type tension control bolts
25.
Freeze-thawing of polyester/e-glass as an evaluation of an ASTM international test standard proposal
26.
Strain Measurement Methods: ASTM C520 and non-standard method
27.
Effects of cyclic drying and wetting on strength and stiffness properties of chemically stabilized sulfate-rich expansive clay
28.
Analysis of ASTM D790-72 and its application to reinforced plastic structural members
29.
Non-invasive permeability assessment of high-performance concrete bridge deck mixtures
30.
A critical evaluation of ASTM method C114, Section 19 for the determination of total chloride content of cured cement and concrete
31.
Evaluation of a modified fixture for testing composite bolted joints with countersunk fasteners under bearing loads
32.
The precision of the bond wrench machine for determining the flexural bond strength of masonry
33.
The fracture analysis and remaining life estimation of the AVLB sub-components
34.
Toughness measurements of high-strength concrete reinforced with steel fibers
35.
The influence of fly ash on obtaining quality plastic and hardened properties of portland cement concrete
36.
Concrete chloride ingress: Effect of FRP type, layers and epoxy
<<First
<Prev
Next>
Last>>
Jump to
