yield strength - Globe Thesis

Keyword [yield strength] Result: 41 - 60 \| Page: 3 of 8
41.	Analysis And Discussion On The Physical Inspection Cases In Baosteel
42.	Preparation And Compressive Properties Of Titanium Foam
43.	The Effects Of Alloy Elements On The Microstructures And Properties Of The Rapidly Solidified NiAl-34Cr Alloy
44.	The Organization Of Petroleum Drill Pipe With Resistance Of Aluminum Alloy And Performance Research
45.	Preparation And Properties Of Graphene/Copper Composites
46.	Effects Of Zr, Nb, Ti On The Microstructure And Property Of The NiAl-9Mo Alloy
47.	Research And Preparation Of Magnetorheological Materials With High Stability
48.	Study Of The Mechanical Properties Of Hight Strength Steel Laser Welding T-joints
49.	Effects Of Large Diameter Sawl Pipe Forming Process On The Mechanical Properties Of Blank Sheet
50.	Factors And Laws On Cement Sheath Structure Integrity Under Non-uniform Crustal Stress
51.	Research On The Austenitic Stainless Steel Used In The Hoisting Device And The Mast Producing
52.	Effect Of Pre-strain And Subsequent Annealing On Mechanical Behavior Of Rolled AZ31 Mg Alloys
53.	Effect Of Composition And Heat Treatment Process On Microstructure And Mechanical Properties Of Enameling Steels
54.	Research On Cement Sheath Mechanical Properties Under The Casing Internal Load
55.	The Investigation Of The Microstructure And Properties Of The 2024(Sc) Alloy And Short Carbon Fiber Reinforced 2024(Sc)composites
56.	Research On ARC Welding Progress Of High Yield Strength Steel DL-700 For Power Fan
57.	Tensile Deformation Behavior Of High Strength Seismic Bars Under Different Temperatures
58.	The Study Of High Yield Strength TWIP Steel On The Behavior Characteristics Of Dynamic Deformation And Crushing Energy Absorbing Of Its Structure Components
59.	Effect Of Neodymium On The Microstructures And Compression Property Of Titanium Foam
60.	Statistic-based Model Of The Initial Geometric Deviation Of Rolled And Welded Steel Cylinder
<<First <Prev Next> Last>> Jump to