Font Size:
a
A
A
Keyword [wedge]
Result: 21 - 40 | Page: 2 of 10
21.
Study Of Theory On Shaping Curve Of Right-Angle Step Of Trio Cross Wedge Rolling
22.
Singular Fields Study Around The Tip Of Multi-material Wedges And Junctions Based On Non-confirming Finite Element FE Eigenanalysis Method
23.
Study On Rational Width Of Pillar Of Tunne Along Goaf Of Fully-Mechanized Cavingl
24.
The Design Of Unidirectional Continuous Flat Wedge CWR Machine
25.
Experimental Study On Birefringence Of Injection-molded Amorphous Polymers
26.
Numerical Simulation On Wedge Deformation Of Spray-deposited 5A06 Aluminum Alloy
27.
The Research On Facility And Technique Of Forming Connecting-rod Billet In Cross Wedge Rolling Processing
28.
Study On The Metallurgical Behavior Of Bond Interface In Ultrasonic Wedge Bonding
29.
Rock Splitting Mechanism Numerical Simulating Analysis Of The Rock Drill-splitter
30.
Study Of Forming Process For Big Size Cross Wedge Rolling Workpiece
31.
Research On Collimation Measurement Based On Laser Interference Technology
32.
The Research On Railway Axles' Processing Methods And Equipments
33.
Theory Study And Calculation Of New Type Screw Press Filter
34.
Effect Of Temperature Gradient Cyclic Pressing On Densification Of Spray Deposited SiC_p/7090 Aluminum Matrix Composite
35.
Analysis And Optimization For Phase Angle Adjustment Mechanism Of Cross Wedge Rolling Machine
36.
Research On Cross Wedge Rolling Of Cone-shaped Shaft Parts Based On Numerical Simulation
37.
Three-dimensional Rigid-plastic Finite Element Simulation For The Process Of Cross Wedge Rolling Of Hollow Shaft Parts
38.
Dynamic Simulation And Mechanics Research Of Contact-Wedge-Backstop Based On Virtual Prototyping Technology
39.
Influence Of Die Wear On Center Porosity In Cross Wedge Rolling Part
40.
Study On The Evolution Of Microstructure Of Non-Quenched And Tempered Steel Shafts In The Course Of Cooling After Three Rool Cross-Wedge Rooling
<<First
<Prev
Next>
Last>>
Jump to
