Font Size: a A A
Keyword [twin roll cast]
Result: 1 - 20 | Page: 1 of 1
1. Investigation On Deformation Technology, Microstructure And Mechanical Properties Of Twin Roll Cast Magnesium Alloy
2. Study Of Hot-working Properties And Warm Deep Drawing Processing Of Twin-roll-cast AZ31 Magnesium Alloys Sheets
3. Development Of Microstructure And Mechanical Properties During Deferential Speed Rolling Of Twin-roll Cast Magnesium Alloys Strips
4. Influence Of Annealing Process On Microstructure And Properties Of 5052 Aluminum Alloy By Twin-roll Cast
5. Study On Microstructure And Texture During Hot Rolling And Normalizing Of Twin-roll Cast Silicon Steel Strip
6. A Study Of The Texture In Twin Roll Cast Aluminum Slab And The Mechanism For Abnormal Grain Growth In The Tempered Strip After Cold Rolling
7. Numerical Analysis And Experimental Study On Near Net Shape Forming Of SiC_p/Al Composites Strip By Twin-Roll Cast
8. Study On Texture Evolution In Twin-Roll Cast Non-oriented Silicon Steel Sheet And Formation Mechanism Of Cube Recrystallization Texture
9. Study On The Evolution Of Microstructure And Mechanical Properties In The Twin-roll Cast 3003 Alloy Foil Manufacturing Process
10. Influence Of Processing Technology On Recrystallization Microstructure And Texture For Twin Roll Cast 3003 Aluminum Alloy
11. Design And Analysis Of Roll And Frame Of Iron Alloy Twin Roll Cast Rolling Mill
12. Numerical Analysis And Experimental Study On Near Net Shape Forming Of SiC_p/Al Composite Section Strip With Simple Shaped Section By Twin-roll Cast
13. Study On The Microstructure And Annealing Process Of 1235 Aluminum Foil Continuous Casting And Rolling Blank
14. Study On The Microstructure Evolution And The High Temperature Oxidation Mechanism Of Twin-Roll Cast Fe-Cr-Al Alloy
15. Numerical Simulation And Process Parameter Optimization Of Twin-roll Cast Magnesium Alloy Thin Strip
16. Study On Technology And Theory Of Twin-Roll Cast Steel/Aluminum Clad Sheet
17. The Effect Of TiC-TiB2 Particles On Microstructure And Mechanical Properties Of Twin Roll Cast Al-Mn-Si Alloy
18. Control System Design And Control Method Research Of Roll Gap Control Of Twin-roll Cast-rolling Thin Strip Steel
19. Study On The Control And Mechanism Of Microstructure Uniformity Of Cast-rolled 3003 Aluminum Alloy
20. Study On Microstructural Control And Aging Hardening Behavior Of Twin-roll Cast Al-Mg-Si-Cu Alloys
  <<First  <Prev  Next>  Last>>  Jump to