three point bending - Globe Thesis

Keyword [three point bending] Result: 121 - 140 \| Page: 7 of 8
121.	Study On The Applicability Of The High Elasticity Constitutive Equation Of Rubber Materials
122.	The Experimental And Simulation Study On Laser Shock Processing And Fatigue Life Of Gear Tooth Root
123.	Studies Of Vacuum Hot-pressing,Microstructure And Mechanical Properties On A Tool Steel With Ultrahigh Carbon And Chromium
124.	Study On Mechanical Properties Of Aligned Steel Fiber Reniforced Geopolymer And Acoustic Emission Characteristics During Bending Failure Process
125.	Preparation And Properties Of High Performance Crack Structure Adhesive For Bridge Concrete And Study On Performance Of Concrete/epoxy Interface
126.	Study On The Boundary Effect Model For Determining The Initial Cracking Toughness And Strength Of Concrete
127.	The Characteristics Of Fracture Process Zone And Fracture Size Effect Of Concrete Were Analyzed
128.	Study On The Effect Of Interfacial Transition Zone Modification On Fracture Property Of Concrete
129.	Secondary Development And Application Of Concrete Damage Constitutive Model Based On ABAQUS
130.	3D Woven Carbon Fiber Composite Prosthetic Foot Research
131.	Study On Bending Fatigue Properties Of Laminated Woven Composites In Salt Spray Environment
132.	Conductivity Distribution Characteristics And Electromagnetic Detection Method Of Woven Carbon Fiber Composites
133.	Research On The Fracture Properties Of Concrete Under Reciprocating Loading
134.	Study On Bending Properties Of Aluminum Foam Sandwich
135.	Numerical Analysis Of Fracture Performance Of Steel Fiber Reinforced Concrete Based On Secondary Development Of ABAQUS
136.	Preparation And Properties Of Electrolyte-Supported SOFCs With Ultra-Thin Honeycomb Structure
137.	Research On Three-point Bending Straightening Method Of Stepped Pipe Fittings
138.	Fracture Characteristics Of Concrete Under Reciprocating Load Based On DIC
139.	Study On Mechanical Properties Of Composite Sandwich Structure
140.	Influence Of Different Mixing Water On Mechanical Properties And Acoustic Emission Characteristics Of Backfill
<<First <Prev Next> Last>> Jump to