Font Size: a A A
Keyword [tapping]
Result: 101 - 120 | Page: 6 of 10
101. Research On Numerical Simulation Of Vibration Extrusion Tapping
102. Studies Of Experiment And Simulation Of Cold Mild Gasification Technology
103. Research On Wells And Layers Selection And Tapping Potential Of Water Flooding At Extra High Water Cut Period
104. The Fine Numerical Simulation Study Of Tapping The Potential In Water Flooding After Polymer Flooding In East Of Xing1-2
105. Application Of Dynamic Monitoring Data In Offshore Oilfield
106. Apricot Oil North Development Zone With The Layer Potential Tapping Technique
107. Study On Roadway Supporting Technology In Weak Seam Under The Influence Of Near Distance Coal Seam Mining
108. Study On Remaining Oil Distribution And Potential Exploitation Of 32 Block In YM Oilfield
109. Study On Distribution Law Of Remaining Oil In Wenchang 15-1 Oilfield
110. Study On The Key Technology Of New Type Of Pressure Drilling Device With Drill
111. Experimental Study On Titanium Alloy Threaded By Deep - Cooling Powder Metallurgy And High Speed ​​Steel Taper
112. Study On Technological Policy Of Advanced Water Injection For Ultra Low Permeability Sandstone Formation
113. Experiment Study On The Behavior Of Inclusion Removal And Drain Sink Control During Ladle Teeming Process With Argon Injected Into Ladle Around The Tapping Hole
114. Heat Transfer Calculation Of Rotary Hearth Furnace Molten Pool Tapping Model And The Thermal Design
115. Mathematical And Physical Simulation Of Transport Behavior During Ladle Teeming Process With Argon Injected Into Ladle Around The Tapping Hole
116. Study On Synthesis Of High Tapping Density Spherical Nickel Hydroxide
117. Study On Tapping Potentials Of OXO Plant
118. Numerical Simulation Of Hot Metal Flow And Induced Wall Shear Stress In Blast Furnace Hearth
119. Experimental Study On New Controlling Slag Carry-over Process During Continuous Casting Ladle Teeming Process With Gas Injected Into Ladle Around The Tapping Hole
120. Numerical Calculation Of Blast Furnace Hearth Tapping Model And The Thermal Design
  <<First  <Prev  Next>  Last>>  Jump to