Font Size:
a
A
A
Keyword [stacking fault energy]
Result: 21 - 40 | Page: 2 of 5
21.
A Crystal Plasticity Finite Element Simulation For Deformation Twinning In TWIP Steel
22.
Mechanical Behaviors And Microstructural Stability Of High Nitrogen Austenitic Stainless Steel
23.
Effects And Mechanisms Of Alloying Elements On The Stacking Fault Energy And Twin-boundary Segregation Energy Of Mg
24.
First-principles Study Of The Generalized-stacking-fault Energy In Mg
139
Al
4
Sn
1
and Ti
4.5
Si
3
Me
0.5
With Hexagonal Structure
25.
The Investigation On Thermal Aging And Stress Corrosion Cracking Sensibility Ofthe Forged316Ln Austenitic Stainless Steel
26.
Cu And Cuzn Alloys Such As Extrusion Angle Channel Grain Refining Efficiency Of Fault Correlation Studies
27.
Effects Of Processing Technology And Stacking Fault Energies On The Mechanical Properties Of Cu-Al Alloys
28.
Influence Of Severe Plastic Deformation Methods And Annealing On Cu-Al-Zn Alloys
29.
Mechanical Behavior And Texture Evolution Of Low Stacking Fault Energy FCC Metals At Large Deformation
30.
Study On Microstructures And Mechanical Properties Of High-aluminum High-manganese Steels
31.
Study On Microstructure, Mechanical Properties And The Difference Of Stacking Fault Energy In Cu By Equal Channel Angular Pressing
32.
Microstucture And Mechanical Properties Of Mocro-alloyed TWIP Steel
33.
Grain Refinement And Thermal Stability Of Materials With Different Stacking Fault Energy Subjected To Constrained Groove Pressing
34.
Study On Microstructure And Mechanical Properties Of TWIP Steel Drawing Wire
35.
The Effect Of Carbon Content On The Stacking Fault Energy And Twinning-induced Plasticity Behavior Of Fe-Mn-Cu-C TWIP Steel
36.
The Organization And Properties Research Of A Marine Engineering High Strength And Toughness High Nitrogen Steel
37.
Preparation Of Single Crystal Silver,Aluminumand And The Influence On The SFE Of Deformation Texture And Microstructure For Cold Drawing
38.
Study On The Mechanism Of Plasticity Of Copper Alloy After Large Plastic Deformation
39.
First - Principles Study On The Fragility Of Iridium (Ir) Elements
40.
Effect Of Deformation On Mechanical Properties Of Copper And Copper Alloy
<<First
<Prev
Next>
Last>>
Jump to