solid-liquid two phase - Globe Thesis

Keyword [solid-liquid two phase] Result: 41 - 60 \| Page: 3 of 6
41.	Numerical Simulation Of Foundry Filling Process Using Smoothed Particle Hydrodynamics
42.	Research On Solid-liquid Two-phase Flow Of New Type Channel Submersible Sewage Pump
43.	Study On The Mechanism Of Multidimensional Vibration Casting Of Small Steel Castings
44.	Study On Optimization Design And Internal Flow Of Two-stage Submersible Pump For Coal Mine
45.	The Design And Structure Optimization Of Reverse Circulation Flushing Device Working In The Bottom Hole Of Workover Well
46.	Investigations On Gas-liquid-solid Three-phase Flow In Casting Filling Process Based On SPH Method
47.	Numerical Simulation Research On The Optimized Particles Distributor And Flow Behavior Of Solid And Liquid Phases In Fluidized Bed
48.	Study On Mechanism Of Coal Powder Production And Migration Rule Of Coalbed Methane Wells
49.	The Numerical Simulation Research Of Solid-liquid Two Phase Abrasive Flow Polishing Special-shaped Surface
50.	Study On Biogas Production From Organic Fraction Of Municipal Solid Wastes In A Dry-wet Two-phase Anaerobic Digestion System
51.	Study On Two Phase Flow Characteristics In A Self-Stirring Reactor Driven By Pressure Energy
52.	Study On The Drilling And Slag Discharge Of Floor Small Aperture Anchorage Hole In Deep Roadway
53.	Study On The Mechanism Of Solid-liquid Two-phase Cyclone Separation Of Non-Newtonian Fluid
54.	Structural Optimization Of Jet Sand Pump And Its Erosion Wear Research
55.	Analysis And Research On Flow Characteristics Of Oil-made Pepper Pipelines
56.	CFD-based Solid-liquid Two-phase Flow Pattern Analysis And Resistance Loss Model Research
57.	Structural Design And Performance Study Of A New Type Of Agitator Based On Numerical Calculation
58.	Numerical Simulation Of Solid-liquid Two-phase Flow Of A New Type Of Inclined Blade Propeller
59.	Investigation On Rheological Behavior And Materials Design Of Solid-Liquid Two-Phase Flow Based On Jet Printing Technology
60.	Numerical Simulation Of Pulp Flowage In Bio-oxidation Pretreatment Based On CFD
<<First <Prev Next> Last>> Jump to