slab continuous-casting - Globe Thesis

Keyword [slab continuous-casting] Result: 141 - 160 \| Page: 8 of 10
141.	Study On The Microstructure And The Change Of Element Distribution In The Non Steady State Of Extra Thick Slab Continuous Casting Slab
142.	The Design Of Automation System Of Slab Continuous Casting Machine
143.	Study On Heat Transfer Of Thin Slab Mold Based On Heat Transfer Inverse Problem Model
144.	Model Experimental Research On Flow And Behavior Of Bubbles In Mold For Slab Continuous Casting With Swirling Flow
145.	The Optimization Of Cooling Process Of Slab Continuous Casting In Straightening Zone
146.	Optimization And Application Of Immersion Nozzle Structure For Thick Slab Continuous Casting
147.	Study On The Flow Behavior Of Molten Steel In A New Immersion Nozzle Crystallizer For FTSC Thin Slab Continuous Casting
148.	Study On Multi-field Coupling Numerical Simulation For DSP Thin Slab Continuous Casting Process And Hot Cracking Susceptibility Of A Hyperperitectic Steel
149.	Key Technologies Research On Thin Slab Continuous Casting Of High Quality Steel
150.	Research On Formation Mechanisms Of IF Steel Surface Defects Through Numerical Simulation
151.	Study On The Flow Control In Thin Slab Continuous Casting Mold
152.	In Effect Of Electromagnetic Swirling Flow Nozzle On Meniscus Level Fluctuations In Mold During Slab Continuous Casting Process
153.	Analysis Of Slow Solidification Microstructure And Inclusion Of Extra Heavy Continuous Casting Slab
154.	Research On Mineral Structure Of Mold Slag And Flux Film In Different Slab Continuous Casting
155.	Investigation On Distribution For Thermal Resistance Of Mold Flux/Air Gap During Slab Continuous Casting
156.	Numerical Simulation And Process Optimization Of Electromagnetic Stirring At Secondary Cooling Zone Of Slab Continuous Casting Machine
157.	Numerical Simulation And Application Of Corner In Straightening Of Slab Continuous Casting
158.	Numerical Simulation Research On Coupled Molten Steel Flow, Heat Transfer And Solidification In Wide Slab Continuous Casting Mold
159.	Design And Research Of Slab Continuous Casting Control System
160.	Study On The Nozzle Parameters Of Slab Continuous Casting Mold Based On Liquid Level Fluctuation F Value
<<First <Prev Next> Last>> Jump to