rolling composite - Globe Thesis

Keyword [rolling composite] Result: 21 - 40 \| Page: 2 of 3
21.	Research On NM500/Q345/NM500 Three Layer Rolling Composite And Heat Treatment Process
22.	Hot Rolling Composite Simulation Of NM400/Q345R And Its Microstructure Properties And Analysis
23.	Numerical Simulation And Experimental Study Of Asymmetrical Rolling Composite Process For 13Cr/Q235 Stainless Steel Composite Plate
24.	Study On Cu/Al Sandwich Composite Experiment And Numerical Simulation During Cold Rolling
25.	Investigation Of Anisotropy Of Microstructures And Mechanical Properties Of The Rolled Ti/Al/Mg/Al/Ti Composite Plate
26.	Microstructure And Properties Of Magnesium-Aluminum Composite Board Prepared Through Explosive Welding
27.	Study On Mechanical Properties And Deformation Characteristics Of Rolled Clad Plate
28.	Study On The Microstructure And Properties Of Ti/Ni/Ti Composites Prepared By Rolling Thinning
29.	Effect Of Shear Extrusion-rolling Composite Forming On Texture And Dynamic Mechanical Properties Of 6016 Aluminum Alloy
30.	Study On The Mechanism Of Electropulsing-assisted Ultrasonic Surface Rolling Processing Of High Strength And High Toughness Titanium Alloy TC27
31.	Fabrication,Microstructures And Mechanical Properties Of Al/Mg/Al Composite Sheets With Three-Dimensional Layer Interface
32.	Study On Interface Diffusion Mechanism Of Cu/Al Solid-liquid Vibration Casting-rolling Composite Process Based On Molecular Dynamics Simulation
33.	Numerical Simulation Of Asymmetric Cast-Rolling And Research On Aluminum/Magnesium Rolling Composite Technology
34.	Study On Preparation And Impact Resistance Of Mg/Al Composite Plate
35.	Study On Copper/Stainless Steel Strips Rolling Composite Process Assisted By Auxiliary Plate
36.	Numerical Simulation And Experimental Study On Rolling Process Of Al/Mg Alloy Clad Plate
37.	Research On Deformation Behavior And Binding Mechanism Of Metal Cold Rolling Composite
38.	Development Of Vacuum Friction Stir Welding Equipment And Research On Rolling Composite Process Of 7××× Aluminum Alloy
39.	Study On Roll Bonding Process And Properties Of Carbon Steel Chips With Stainless Steel Coating
40.	Study On Strengthening Mechanism And Wear Properties Of 7N01 Aluminum Alloy After Cutting-Ultrasonic Rolling Composite Processing
<<First <Prev Next> Last>> Jump to