Font Size: a A A
Keyword [powder metallurgy]
Result: 141 - 160 | Page: 8 of 10
141. Effects Of Sintering Temperature On The Properties Of Cu-based Alloys Matrix
142. Study On Magnetocaloric Effect Of LaFeCoSiB Series Compounds Prepared By Powder Metallurgy Method
143. Study On The Corrosion Behavior Of The New Type Of Te- Ni-Cr Alloy
144. Preparation Of Fe-base Alloy With High Performance By Powder Metallurgy Warm Compaction
145. Effect Of Al,Zr On Properties And Microstructure Of Fe-18Cu Matrix PM Friction Material
146. The Research Of Fabrication And Performance In-situ MgO Reinforced Magneisum Matrix Composites
147. Study On Preparation And Properties Of Aluminum Foam Sandwich By Mixing Elemental Powder Rolling
148. Fabrication And Properties Of Copper Matrix Composite Reinforced By Cu-Coated Graphite And Nano-SiCp
149. Study On The Preparation Of Iron-Based Structural Material Using Hyperpure Powders And Treatment Of Carburization
150. Preparation And Properties Of A Al-based Bulk Amorphous Alloy By Powder Metallurgy
151. Research On The Preparation And Properties Of Al3Tip/Mg Composite Materials
152. Fabrication And Properties Of SiCp/2024Al Composite Foams
153. Preparation Of MnSi1.7 Thermoelectric Material And Calculations Of Its Electronic Structure
154. The Research And Manufacture Of 200T Automatic Powder Metallurgy Press
155. Study On Preparation Technology And Electrical Properties Of Carbon Nanotubes Reinforced Copper Matrix Composites
156. Study On Preparation Technology And Properties Of Copper And Copper Alloy Foam
157. Research On The Microstructure And Properties Of The Powder Metallurgy Fe-C-Cu-Cr-Mn Material
158. Fabrication Of TiNb-based Composites With High Strength And Plasticity Based On Crystallization Theory
159. Investigation On Microstructure And Performance Of TiC/Cu-Al2O3Electrical Contact Material Fabricated
160. Preparation Process And Performance Of SiC Particulate Aluminum Matrix Composites
  <<First  <Prev  Next>  Last>>  Jump to