plastic strain - Globe Thesis

Keyword [plastic strain] Result: 61 - 80 \| Page: 4 of 5
61.	Substructure based modeling of nickel single crystals cycled at low plastic strain amplitudes
62.	Optimization of a new preform die design for forging a rotating part using computer modeling and analysis
63.	The prediction of low cycle fatigue for die casting with FEM
64.	Plastic strain analysis of the surface damage in metal cutting
65.	AN ANALYSIS OF LOCALIZED NECKING IN BIAXIALLY STRETCHED SHEETS
66.	Fabrication and Optimization of Ni Superalloy Inconel 600 Microtruss Materials
67.	Studies On Room Temperature Creep And Dwell Fatigue Properties Of Marine Engineering Titanium Alloys
68.	Study On Mechanical Properties And Thermal Stability Of Pseudo-High Entropy Zr-Based Bulk Amorphous Alloys
69.	Study On Mechanical Behavior Of Polycrystalline Beryllium Under Macro Tensile Test And Nanoindentation At Room Temperature
70.	Effects Of Cyclic Tensile Stress And Plastic Strain On The Degradation Behavior Of Pure Magnesium In Simulated Body Fluids
71.	Research On A Modified Bezier Interpolation-type Anisotropic Yield Loci And Evolution Model
72.	Effect Of Cyclic Pre-deformation On The Uniaxial Tensile Behavior Of Cu And Cu-Al Alloys
73.	Evolution Of Microstructure Of Medical Metal Microtube In Cyclic Rotating Bending Process
74.	Numerical Study On The Strengthening Mechanisms Of Gradient Nanotwinned Metals
75.	Structural Parameters And Mechanical Behaviors Of Laminated Nanotwinned Cu
76.	The Theory And Test Study On Zonal Disintegration In Surrounding Rock
77.	Study On Characterization Method Of Residual Plastic Strain For Base Metal And Girth Weld Of X70 Pipeline
78.	Prediction Of FSW Deformation For Large Size Components Based On Strain Mapping
79.	Effect Of Thin And Deep Drilling On Thermomechanical Behavior Of Mold Copper Plate For Continuous Casting
80.	Parameter Optimization And Hardening Behavior Of Wire And Arc Additive Forming Aluminum Alloy
<<First <Prev Next> Last>> Jump to