Font Size:
a
A
A
Keyword [performance failure]
Result: 1 - 20 | Page: 1 of 2
1.
Research On Matrix Failure And Mechanical Performance Of The Ceramic Matrix Composites With Pores
2.
Development Of Ti (C, N) - Based Cermet Tool Based On Microwave Sintering Process And Its Cutting Performance
3.
Ethylene Cracking Furnace Tube Performance And Failure Analysis
4.
Preparaton And Mechanical Properties Of Improved Pyramid Lattice Trus Structure
5.
Research On Failure Mechanism Of Polyphenylene Sulfide Filter Media
6.
Cutting Performance And Failure Mechanisms Of A Pure WC Cutting Tool And A SiC-TiC Cutting Tool
7.
Preparation And Cutting Performance Of Microwave Sintered GPLs Toughened Al 2 O 3 Ceramic Tool
8.
Study On Failure Mechanisms Of Ceramic Cutting Tool Based On The Evolution Of Mechanical Behaviors At Elevated Temperature
9.
Study On Magnetic Pulse Form-fit Of 6061 Aluminum Alloy-45 Steel Tubes Based On Flat Coil
10.
Study On Process Technology And Effect Of Low Velocity Impact On The Tensile Performance Of Unidirectional Braided Laminated Composites
11.
Preparation,Characterization And Compressive Properties Of Aluminum Foam
12.
Fabrication Technology And Energy Absorption Mechanism Of Three-Dimensional Braided Composite Tube
13.
SPS Sintering Process And Properties Of Ultra-fine Grained WC-based Cemented Carbide Tool Materials
14.
Study On Failure Of Continuous Fiberglass Composite Tape Reinforced Thermoplastic Pipe
15.
Studies On Load-bearing And Failure Behaviors Of Composite Mesh And Its Reinforced Structures
16.
Study On High Temperature Performance And Failure Mechanism Of 8YSZ And La
2
Zr
2
O
7
/8YSZ Thermal Barrier Coatings
17.
Research On Technology And Joint Mechanical Properties Of AA5052-DP590 Electromagnetic Single-side Riveting
18.
Study On Bond Anchorage Performance Of UHPC Anchorage Joint
19.
Structure Design,Preparation And Failure Mechanism Of High Thermal Insulation And Thermal Shock Thermal Barrier Coatings On TiAl Alloys
20.
Research On Dynamic Constitutive Model Of Reactive Powder Concrete And Anti-explosive Properties Of RPC Members
<<First
<Prev
Next>
Last>>
Jump to