Font Size: a A A
Keyword [multi-"tentacles"]
Result: 1 - 20 | Page: 1 of 10
1. Study On The Production Of Heat-resistant Aluminum Alloy Pipe Blanks With Large Dimensions By Multi-layer Spray Deposition
2. Study On The Process,Devices And Principle Of Multi-Layer Spray Co-Deposition Technology For The Preparation Of Large-Sized SiC Particulate-Reinforced Aluminum Alloy Composites
3. Intelligent Resolution System For Complicated Multi-component Chemical System
4. Application Of Multi-resolution Methods Based Chemometrics To The Analysis Of Traditional Chinese Medicine And Researches On Its Chemical Charateristic Fingerprint
5. New Algorithms For The Analysis Of Multi-way Data Arrays In Analytical Chemistry
6. Research On Fabrication Of The Anti-Wear Gradient Surface Coating And Its Sliding Friction Property
7. The Process And Mechanical Properties Of High Silicon-content Aluminum Alloy By Multi-Layer Spray Deposition Technology
8. Study On Process Integration For Waste Minimization
9. Research On Computer-Aided Catalyst Design And An Application In Multi-Component Catalyst Design Of Methane Oxidative Coupling
10. A Study On The Improvement Of Cycling Stability Of Ball-milled Mg-based Hydrogen Storage Electrode Alloys By Means Of Multi-component Alloying
11. The Development And Theory Research Of The Multi-Disc Gyratory Separator(MDGS)
12. Study On Thermodynamic System Of Urea Process And Development Of Flowsheeting
13. High-Temperature Corrotion Behavior Of 310SS And It's Protection
14. Study On Approach And Mechanism Of Biodegradation Of Valonia Tannin
15. Preparation And Properties Of Multi-system Ceramics For High Quality Piezoelectric Transformer
16. Research On Structure, Properties And Wear Mechanism Of ZrO2 And Al2O3 Multi-phase Ceramics
17. Study On Process Integration For Wastewater Minimization
18. Studies On Grafting Copolymerization Of Styrene And Maleic Anhydride Onto Rubber
19. Study On The Phase Equilibrium And Crystallization Separation Of Synthetic Nitro-musks
20. Study On The Methods Of Precision Modeling And Error Compensation For Multi-Axis CNC Machine Tools
  <<First  <Prev  Next>  Last>>  Jump to