mold-flow - Globe Thesis

Keyword [mold-flow] Result: 21 - 40 \| Page: 2 of 4
21.	Injection Mould Research Based On The UG
22.	The Reverse Engineering And Mold Flow Analysis Of Remote Bezel
23.	Study On The Injection Molding Process And Flow Induced Crystallization Of Impact Polypropylene
24.	The Slab Caster Mold Numerical Simulation Of Flow Field And Temperature Field And The Structure Optimization Design
25.	Vertical Behavior Of Molten Steel In Slab Continuous Casting Mould Process Of Mathematical Physics Simulation
26.	Variable Glass Fiber Reinforced Reaction Injection Molding Technology Was Studied
27.	Molding Design And Injection Process Of The Receiver Base From PPA+60%GF
28.	Injection Molding Process Analysis And Mold Design Of Electro Acoustic Products Clip Cover
29.	Research And Application Of Bi-color Injection Molding Technology
30.	Research CSP Copper Mold Flow And Heat Transfer Behavior
31.	Warping Deformation Research Of Injection Molding Of Plate Plastic Parts Based On Moldflow
32.	High Pressure Die Design Based On UG Secondary Development Research And Typical Die Casting ProCast Mold Flow Analysis
33.	Research On The Design Of The Beverage Container Framework Plastic Injection Mold
34.	Numerical Simulation And Process Study Of Relay Shell Injection Molding
35.	Research On Fluid Flow And Heat Transfer With M-EMS In Rectangular Bloom Mold
36.	Numerical Simulation On Steel Flow Field And Temperature In Mold For Casting Super-large Hollow Tube Billet
37.	Research On Design Of Injection Mold And Optimization Of Process Parameters For Mobile Shell Based On Numerical Simulation
38.	Mold Flow Analysis And Parameter Optimization Of Xiaomi Charging Treasure Cover Injection Mold’s Gating System
39.	Research On Inclusion Control Key Technologies Of High Quality Low Carbon Steel In Large Flux TSCR
40.	Simulation Study On Slag-Steel Reaction Kinetics And Flow Field In Mold For High Aluminum Steel
<<First <Prev Next> Last>> Jump to