Font Size: a A A
Keyword [microstructure.]
Result: 101 - 120 | Page: 6 of 10
101. Study On Preparation, Simulation And Grain Refinement Mechanism Of Bulk Ultrafine-grained 2A12 Al Alloy Pressed By Equal-channel Angular Pressing
102. Development Of High-Performance Si3N4/TiC Nanocomposite Ceramic Tool Materials And Investigation Of Their Properties
103. Investigation For Influence Of Preparation Parameters And Component On Microstructure And Magnetic Properties For Nanocomposite Nd2Fe14B/α-Fe Permanent Magnet
104. Investigation On The Fabrication And Properties Of The Cu Base Composites With Low Friction And High Wear Resistance
105. Microstructures Of Metal Materials Induced By High Current Pulsed Electron Beam
106. Research On The Ti(C,N)-based Cermets Of High Performance And Cutting Properties Of Cermets Cutters
107. Research On Rare Earth Modification And Cutting Mechanism Of Die-Cast Magnesium Alloy AZ91
108. Preparation And Microstructure Of Polymer-based Nanocomposite
109. Study On Mold Filling And Solidification Of Magnesium Alloy In Lost Foam Casting Process Under Controllable Pressure
110. Interaction Between Electrocatalytic Active Elements And Their Carriers
111. Research On Processing, Microstructure And Properties Of X80 High Grade Pipeline Steel
112. Welding Physical Metallurgy Of RPC Ultrafine Microstructure Steel
113. Study On Microstructure And Mechanical Properties Of Magnesium Alloy Via Lost Foam Casting
114. Research On Nano-composite Materials Of Ti(C,N)-based Cermets
115. Studies On The HA/316L Stainless Steel Biological Functionally Gradient Materials
116. Theoretical Research And Industrial Practice Of Sandy Alumina With High Strength From Diaspore
117. Microstructural, Mechanical And Electrical Characteristics Of Cu-Ag Filamentary Microcomposites
118. Finite Element Analysis For Ballistic Impact Of 3-D Braided Composites
119. Stabilization Mechanisms And In-situ Coagulation Casting Of Alumina Slurry Dispersed In Silica Sol Without De-airing Process To Prepare Mullite Ceramics
120. Study On Development And Cutting Performance Of High Mechanical Property Cermet Tool Materials
  <<First  <Prev  Next>  Last>>  Jump to