micro-injection - Globe Thesis

Keyword [micro-injection] Result: 41 - 60 \| Page: 3 of 6
41.	Three-dimension Numerical Simulation Of Filling Stage In Micro-Injection Molding
42.	Theoretical And Experimental Study On The Filling Process Of Injection Molding Micro-Channels
43.	Study On Mechanism And Application In Precision Injection Molding Of Microstructures Assisted By Ultrasonic Vibration
44.	Methodology And Technology For Ultrasound-assisted Micro Injection Molding
45.	The Research On The Rheological Rule Of The Polymer Injection Molding And The Processing Technology
46.	Research On Surface Effect Of Polymer Melt And Injection Molding Of Flat Micro-device
47.	Experiment And Simulation Of Micro Injection Molding And Microwave Sintering
48.	The Research Of Precision Control Techniques In Melt Filling Flow Of Micro Injection Molding
49.	Optimize Design Of Runner System In Micro Molding Based On Numerical Simulation
50.	Quality Research For Injection Molding Of Ultrasond-based Microfluidic Chip
51.	The Influence Of Injection Speed On The Filling Stage Of Micro-injection Molding And Morphology Of The Parts
52.	Analysis Of Morphology And Shrinkage Of IPP Micro Injection Molded Parts
53.	Experimental Study Of Injection Molding Of Micro-channel Heat Exchanger Based On LLDPE
54.	Research On Injection Warpage And In-mold Bonding Of Polymer Flat Micro Parts
55.	The Filling Properties Of Micro-column Arrays Parts Based On Ultrasonic Vibration
56.	Experimental Research On The Improvement Of Micro Structure Duplication Using Electrothermic Variotherm Injection Molding Technology
57.	Process Study Of Metal Micro Devices Fabricated By Copper Or Nickel Electroforming
58.	Effect Of Ultrasonic Vibration On Viscous Dissipation In Micro Injection Molding Process
59.	Analysis Of Formability And Morphology Of IPP Micro Injection Molded Parts
60.	Study On The Filling Behaviors Of Ipp Microarray Structural By Micro Injection Molding
<<First <Prev Next> Last>> Jump to