mechanical properties optimization - Globe Thesis

Keyword [mechanical properties optimization] Result: 1 - 20 \| Page: 1 of 2
1.	Microstructure Control And Mechanical Properties Optimization Of Silicon Nitride Based Ceramics
2.	Mechanical Characteristic Analysis And Optimization Design Of Two-layer Steel Plate Concrete Shaft Lining Based On ANSYSY Software
3.	Microstructure Control And Mechanical Properties Optimization Of GH4706 Wrought Superalloy
4.	Study On Geometric Bi-scale Analysis And Optimization Design Of The Structure Of Marine Umbilical
5.	Optimum Design Of Compressible Shaft Lining Joint Of Freezing Shaft Based On ANSYS
6.	The Numerical Simulation And Optimal Design Of The Composite Catenary Riser
7.	Research On Optimization Of Sucker Rods In Lining Oil Tube
8.	Study On Transportation And Mechanical Properties Optimization Of Sand-based Cemented Filling Materials
9.	Optimum Design Of Sofa Wood Frame Structure Based On Production Operation Research
10.	Parameter Design And Stress Analysis Of High Temperature Alloy Lattice Sandwich Structure
11.	Structure Optimization And Performance Simulation Of Screw Pump Well Centralizer
12.	Three Dimensional Printing Craft And Mechanical Properties Optimization For Room Temperature Vulcanized Liquid Silicone Rubber
13.	Study On Mechanical Characteristics Of Jujube Residue And Optimization Design Of Crushing Equipment
14.	Preparation And Mechanical Properties Optimization Design Of Three-dimensional Denim Waste Fiber Needle-punching Composites
15.	Composition & Processing Design And Conventional Mechanical Properties Optimization Of Reduced Activation Ferritic/Martensitic Steels
16.	Experimental Study On Mechanical Properties Optimization Of Frost Resistant Vegetation Concrete
17.	The Regulation Of Oxide Second Phase Particles In Oxide Dispersion Strengthened Tungsten Alloy And Its Strengthening And Toughening
18.	Research On Microstructure And Properties Of Additively Manufactured Ti-6Al-4V Alloy Tailored By Electropulsing
19.	Investigation Of Carbon Fiber Placement Method For Thin-Walled Composite Shells
20.	Structural Design And Mechanical Properties Optimization Of AlSi10Mg Lattice Melted By Selective Laser
<<First <Prev Next> Last>> Jump to