injection rate - Globe Thesis

Keyword [injection rate] Result: 1 - 20 \| Page: 1 of 3
1.	Morphology Development And Control Of PC/PE Blend During Processing And The Morphology, Structure And Properties Of The Morphology Controlled Blend
2.	Technology Of Decreasing Injection Pressure And Increasing Injection Rate By Surfactant In The Daqing Oilfield
3.	Study On Development Law Of Sazhong Oil Field With Polymer Flooding
4.	Study On Petroleum Sulfonate Flood In Low Permeability Reservoir
5.	The Experiment Study Of Magnetization-Vibration For Increasing Injection Rate
6.	Study On Determination Approaches Of Water Injection Rate Of Skewed Pattern With A Combination Of Horizontal And Vertical Wells
7.	Study On The Feasibility Of Heidimiao Heavy Oil Steam Drive Development
8.	The Research Of S Oilfield Extra High Water Cut Period To Displacement Characteristics Affection
9.	Research On Minimum Gas Injection Rate In Gas Drilling Horizontal Or Highly-deviated Wells
10.	Experimental Research On Physical Modeling Of Flooding Oil In Block Xing13
11.	Research On SAGP Technology Development For Super Heavy Oil In Guantao Reservoir Of Block Du84
12.	Study Of Depressure And Increasing Injection Rate Technology AnSai Oil Field
13.	Technology Of Decreasing Injection Pressure And Increasing Injection Rate By Surfactant In The Low Permeability Oilfield
14.	The Morphology Evolution Of Injection Molded IPP Parts
15.	Research On Steam Flooding Development Effectiveness Prediction And Parameter Optimization Method Based On Intelligent Computation
16.	Stretch Spinning Solution Preparation Of High-performance Polyacrylonitrile Fiber
17.	The Research Of Water Injection Optimization Technology Of Low Permeability Oil Field In Panguiiang
18.	Feasible Experimental Study On EOR In UDM Oilfield
19.	Study On The Experiment Of Binary System Flooding Relative Permeability In Bohai Oilfield
20.	Study On Water-flooding Exploitation Technology Policy Of Y6 And Y9 Reservoirs
<<First <Prev Next> Last>> Jump to