hole processing - Globe Thesis

Keyword [hole processing] Result: 61 - 80 \| Page: 4 of 5
61.	Study On Drilling Process Of Deep Hole Nesting For Titanium Alloy
62.	Simulation And Experimental Study On Microstructure&Drilling Tool Wear Of Thin Plate Deep Hole Processing
63.	Energy Consumption,Carbon Emission Calculation And Optimization Of Cutting Parameters During Hole Processing
64.	Research On The Key Technology Of Small Hole Processing On Titanium Alloy Machined By Micro-EDM
65.	Research On Optimization Design Of Deep Hole Tool Based On Precision Guidance
66.	Structural Optimization Design Of Negative Pressure Chip Removal Device For Deep Hole Processing
67.	Deep Hole Drilling Test And Parameter Optimization Of Nuclear Power Tube
68.	Study On Electrode Wear And The Law Of Interelectrode Discharge Of Micro-EDM
69.	Study On Edge Chipping At The Small Hole Exit In Rotary Ultrasonic Milling-grinding Of Microcrystalline Mica Ceramics
70.	Development Of Spring Hinge Mounting Hole Processing And Visual Inspection Equipment
71.	Research And Development Of Virtual Deep Hole Machining System Based On Unity3D
72.	Research On Blind Hole Processing Of Carbon Fiber Reinforced Plastics By Short Pulse Laser
73.	Research On Full-process Machining Methods Of Slender Hole Parts With Interference State
74.	Research On Oxygen-free Copper Deep Hole Processing Technology
75.	Analysis On Axis Straightness Error Of Deep And Small Hole Based On Ultrasonic Detection And Image Processing
76.	Fundamental And Application Research On The Deep Hool Gun-drilling Of Ti6Al4V Titanium Alloy
77.	Research On Nanosecond Laser Processing Mechanism Of 2.5-dimensional C/SiC Composites
78.	Research On Self Guided Electrical Discharge Machining Technology Of Curved Holes Tube Electrode
79.	Experimental Study On Abrasive Erosion And Electric Discharge Combined Machining Of EB-PVD Coated Parts
80.	Research On The Influence Mechanism Of Magnetic Confinement On Deep Hole Processing By Electrofusion Blasting
<<First <Prev Next> Last>> Jump to