hole processing - Globe Thesis

Keyword [hole processing] Result: 41 - 60 \| Page: 3 of 5
41.	The Simulation And Research On The Deep Hole Quasi-dry Processing Chip Device
42.	Research Of On-line Monitoring Method For The System Of Cutting Fluid For The Deep Hole Processing
43.	The Research Of The Deep Hole Cutting Chatter Suppression Strategies Based On MR Effect
44.	Prediction Research On The Drilling Force Of The Gun Drill Axial Vibration Drilling
45.	Analysis And Research On The Straight Error Of The Deep Hole Machining Based On The BTA Cutting Tool System
46.	The Design And Research Of The Deep Hole Drilling Processing Cutting Parameter Expert System
47.	Design And Research On Efficient Negative Pressure Chip Pumping System Of The Deep Hole Processing
48.	New High Throughput Twist Drill Used In Deep Hole Drilling
49.	Research On Eccentricity Mechanism Of BTA Boring Machining System Induced By Cutting Fluid Coupled Eccentric Pilot
50.	Study On The Application Of Dynamic And Dynamic Support In Drilling Rod Anti - Deviation Of Deep Hole Machining
51.	Study On The Processing Technology Of Carbon Fiber Reinforced Plastics
52.	Study On Electrochemical Machining Technology Of Self Guiding Curved Holes
53.	Forming Mechanism Of Inner Hole In BTA Deep Hole Processing With Mechanical Effect Constraint
54.	Research On Deviation And Correction Technology Of Axial Deviation Of Deep Hole Machining
55.	Design And Research Of Chatter Suppression Device For Deep Hole Machining
56.	Optimum Design And Technological Test For Deep Hole Inner Wall's Blind Hole Processing Device
57.	New High Efficient Twist Drill Used In Deep Hole Drilling
58.	Study On Design Of Deep-hole Machine Vibration Absorber And Vibration Suppression Method
59.	Optimization Design And Experiment Research Of Small Deep Hole Gun Drill Based On GCr15
60.	A Study On Deep Hole Processing Technology Of 17-4PH
<<First <Prev Next> Last>> Jump to