free-form surface - Globe Thesis

Keyword [free-form surface] Result: 61 - 80 \| Page: 4 of 7
61.	Research Of Multiresolution Turning For Free-form Surfaces
62.	Research On Ultra-precision Polishing Experiment Platform Of Free-Form Surface And Tool System
63.	Development Of Five-axis Machining System For Normal Holes On Free-form Surface Part Based On IGES
64.	Generation And Optimization Of Tool Trajectories For Five-axis Flank Milling
65.	Research On Measurement And Evaluation Of Surface Machining Error Based On Reconstruction Of NURBS Control Points
66.	Study On The Non-contact In-situ Measurement System For Free-form Surfaces
67.	Study On Compliant Polishing Of Free-form Surface Based On MRT
68.	Research On Turning Freeform Surface Of Brittle Material By Changing Feedrate
69.	Design Of A Three Degree Fast Tool Servo Device For Free-form Surface Turning
70.	Development Of An Active Changing Cutting Tool Angle Servo Apparatus For Free-form Surface Turning
71.	Research On The Mechanical Properties And Contact About The Abrasives Layer Of Soft Consolidation Pneumatic Wheel
72.	Contact Analysis Of Higher-order Curved Surface And Relevant Application In Free-form Surface Machining
73.	Study On Generation And Optimization Of Five-axis Machining Tool Path Of Free-Form Surface
74.	Tool Path Planning Of NC Machining Based On Circular Surface Tool Free Surface
75.	Research On Flank Milling Of Free-form Surface Using Cylindrical Tool Based On Least Squares Principle
76.	Research On In-situ Measurement Method And Experimental Study For Free-form Surface Of Blade
77.	Research On The Technology Of Diamond Turn-milling Free-form Surface
78.	Studying Contacting Status Between Toroidal Tool And Free Form Surface
79.	Research On NC Machining Method Of Five Axis Micro Machine Tool
80.	Research Of The Novel Elastic Abrasive Polishing Technique For Free-form Surface Mould
<<First <Prev Next> Last>> Jump to