Font Size: a A A
Keyword [forming limit.]
Result: 41 - 60 | Page: 3 of 10
41. Investigation On The Establishment Method Of Forming Limit Diagram For Tube Hydroforming
42. Hot Forming Limit Diagram For Titanium Alloy And Ti2AlNb Intermetallics Sheets
43. Effect Of Strain-path Changes On The Prediction Of Forming Limit Curve In AA3104Aluminum Sheet
44. Research On Hot Rolling And Hot Forming Limit Diagram Of Aluminum Clad Magnesium Sheet
45. Research On Orange Peel Generation Mechanism And Forming Limit Of Al-Li-S4Aluminum-lithium Alloy In Stretch Forming Process
46. The Impact Of Uniaxial Pre-strain To The Forming Limit Of The High Strength Steel For Auto-body Under Electromagnetic Forming
47. Prediction The Forming Limit Of Ni Coated Sheet By Ductile Fracture Criterion
48. Research On Microstructure, Properties And Springback Of Cold-Rolled Dual Phase Steel
49. Study On Factors Influencing FLD Of Aluminum Alloy And Application Under Warm/Hot Stamping Conditions
50. Prediction Of Aluminum Alloy Sheet Forming Limit And Numerical Simulation
51. Study On Experiment And Prediction Of The Forming Limit Diagram Of High Strength Steel Laser Tailor Welded Blanks
52. Study On Theory And Simulation Of Tensile Failure Of Multi-gauge High Strength Steel Laser Tailor-welded Blanks
53. The Combination Of Pressure Pipe Fittings Modular Design And Forming Process Method Of Research
54. Non-rotational Symmetry Of The High-strength Steel Forming
55. Cae Analysis Technology In The Home Appliance Plate Stamping
56. Research On The Forming Limit Of Conditions For One-step Stamping For Conical Parts
57. Forming Limit Of SUS304 Stainless Steel Thin Sheets On Mesoscale
58. A Study Of Forming Limit In Multi-pass Conventional Spinning And Multi-objective Optimizationof Its Spinning Deformation Quantity Distribution
59. Investigation On Drawing Of 5A06 Alluminum Alloy Frame-shaped Part
60. Research On Bend Forming Limit Forrectangular Tube Of 22MnB5
  <<First  <Prev  Next>  Last>>  Jump to