Font Size: a A A
Keyword [finiteelement]
Result: 21 - 40 | Page: 2 of 8
21. Numerical Simulation And Experimental Study Of Creep Sizing Process On2A14Aluminum Alloy
22. Study On Numerical Method Of Strength Analysis Based On Coupling Method Of Welding Residual Stress And Service Load
23. Vertical Boring And Milling Machining Center Comprehensive Error Analysis And Compensation Method
24. Processing Technology Research On EDM Of Composite Electrode And Dispersant Working Fluid In Small Holes
25. The Optimal Design Of The Roller Press Working Device
26. The Study Of The Deformation During High Speed Milling Of Silicon Carbide Composites Of Aluminum (SiCp/Al) Composites Thin-walled Workpiece
27. Effects Of ECAP On The Microstructure And Mechanical Properties Of AZ31Magnesium Alloy
28. Prediction And Research Based On Dynamic Simulation Of The Carrying Capacity Of Down Coiler
29. Modeling And Rolling Schedule Optimization Of Seamless Steel Tube Rolling Process
30. Research On The Grinding Force Of The Electroplated CBN Wheel With Abrasive Phyllotactic Pattern
31. A Research On Safety Of Ultra-high Speed Grinding Wheel
32. Design And Strenth Analysis For A General Fermentation Tank
33. Design And Analysis On Soft Straw Bale Loosing And Crude Shredding Machine
34. Design Of Vehicle CBM Drilling Rigs And Research On Special Power Swivel
35. Prediction The Forming Limit Of Ni Coated Sheet By Ductile Fracture Criterion
36. Microstructure And Properties Of Middle And High Carbon Steel Hardfacing Alloy With Y2O3as Well As Numerical Simulation
37. The Research Of The Structural Strength Analyses And Dynamics Analyses For The Main Features Of Large Electroslag Furnace
38. The Experimental Study On Burst Pressure Of UHP Reaction Tube
39. 150t/h Of Lignite Coal Drying System Key Technology Application Research
40. The Kinematics And Dynamics Research Of Mine-used Rotary Drill Bit
  <<First  <Prev  Next>  Last>>  Jump to