extrusion blow molding - Globe Thesis

Keyword [extrusion blow molding] Result: 1 - 20 \| Page: 1 of 2
1.	Study On Structure And Properties Of Modified PVA Hollow Products Prepared By Extrusion-Blow Molding
2.	Study On The Blow Molding Processing Of PVA And Properties Of Its Product
3.	The Numerical Simulation On Extrusion Blow Molding Mechanism
4.	Effects Of Temperature On Parts' Wall Thickness Homogeneity In Extrusion Blow Molding
5.	Effects Of Pressure's Changing In Extrusion Blow Molding On Wall Thickness Of Hollow Industrial Workpieces
6.	Study On Preparation Of Hydroxypropylated Cross-linked Starch Films By Extrusion Blow Molding
7.	Simulation Analysis Of Head Flow In The Three-layer Blow Film Extrusion Process
8.	The Key Technology Research Of Large-Scale Hollow Blow Molding Machine Dies
9.	Research On Extrusion Blow Molding Process And Slow Release Properties Of PVA Slow-release/Controlled-release Packaging Film
10.	Key Technology Research And Development And Mechanisim Analyses For Rapid Thermal Cycling Molding With Electric Heating
11.	Study Of New Structure Of Plastic Ampoules And Its Molding Method
12.	Optimization Research On The Wall Thickness Distribution Of Extrusion Blow Molding Products
13.	Research On New Process Of Combination Of Local Vacuum Forming And Extrusion Blow Molding
14.	Flow Field Analysis And Parameter Optimization Of Filtration And Distributary Device In The Multi-dies Extrusion Blow Molding Equipment
15.	Research On Cooling Process Of Extrusion Blowing Products Under The Condition Of Condensed Water Film
16.	The Thickness Control Mechanism Of Extrusion Blow Molding
17.	In-cycle control of the extrusion blow molding process
18.	Effects of extrusion blow molding internal cooling technology on HDPE container performance
19.	Qualitative model-based fault diagnosis applied to extrusion blow molding
20.	Development of process windows for intermittent extrusion blow molding
<<First <Prev Next> Last>> Jump to