drilling parameters - Globe Thesis

Keyword [drilling parameters] Result: 61 - 78 \| Page: 4 of 4
61.	Research On Stress Measurement While Drilling Technology
62.	Experimental Study On Drilling Of SiCf/SiC Composites And Optimization Of Tool Geometry Parameters
63.	Influence Of Cortical Bone Drilling Parameters On Drilling Surface Quality
64.	Study On Crossing Hole Pre-drainage Gas Out Burst Prevention Of Cross-hole Uncovering Coal
65.	Experimental Study On Response Characteristics Of Drilling Coal And Rock
66.	Quantitative Identification Of Rock Strength Based On Drilling Parameters Of Anchor Hole
67.	Experimental Study On Variation Of Borehole Parameters Under The Influence Of Mining Stress
68.	Research On Coal Stress Inversion Based Of Bit Drilling Parameters
69.	Research On The Real-time Evaluation Of The Rock Breaking Efficiency Of The Drill Bit And The Optimization Of The Drill Bit
70.	Research On Interface Identification Method And Application Of Potential Outburst Hazards Based On Measurement While Drilling
71.	Research On Intelligent Optimization Method Of Drilling Parameters Based On Machine Learning
72.	Research On Drilling Parameter Optimization Method Based On Machine Learning
73.	Modification And Application Of Mechanical Specific Energy Model
74.	Application Research On Crossing Fault Technique Of 1006 Working Face In Fucun Coal Mine
75.	Research And Application Of Drilling Pressure Relief Layout Parameters In Coal Mine Roadway
76.	Experimental Study On Multi-stage Reaming Drilling Technology And Deformation Zoning Of Surrounding Rock Of Structural Coal Hole Wall
77.	Research On Optimization Of Drilling Parameters Using Multi-attribute Feature Extraction Based On Distributed Cluster
78.	Development And Application Of A Test Device For Characterizing Rock Mechanical Properties With Drilling Parameters
<<First <Prev Next> Last>> Jump to