Font Size: a A A
Keyword [distortion]
Result: 21 - 40 | Page: 2 of 10
21. Study On Controlling Of Welding Deformation And Hot Cracks Of Aluminum Lloy Thin Plates By Two Direction Pre-Stress
22. Accuracy Control Of Superplastic Forming For TC4 Titanium Alloy
23. Research On Some Key Problems For Fused Deposition Modeling
24. Controlling Welding Distortion And Cold Cracks Based On External Electromagnetic Field
25. Numerical Simulation Research On Forming Defects And Their Suppression Methods In Profile Multi-point Bending
26. One-dimensional Carbon Nanomaterials And TiO2 Nanomaterials: Controlled Synthesis, Characterizations, Properties And Application
27. HRTEM Study Of The Lattice Distortion In Nano-crystallites And The Strain Gradient Effect Of Bulk Nanocrystalline Copper
28. Studies On The Titanium Matrix Biofunctionability Medical Composites With Potassium Titanium Oxide Reinforced Surface
29. The Study Of The Mechanism And Prevent Step About The Attrition Phenomenon Of Waterflooding Pumping Units Well's Pole And Tube's
30. Temperature Field Simulation Of Casting Solidification Process And It's Defect Prediction Of Shrinkage Cavity, Heat Distortion And Heat Crack
31. Stability Analysis And Controlling Of The East Slope In Yimin Open-pit Mine
32. The Study Of Design Parameters & The Development Of Design Software For Coil Box
33. Neural Network System Development And Research Of Laneway Distortion
34. 3D Measuremnet Based On Digital Phase-Shifting And Fringe Projection Technique
35. The Study On Solvent Resonance Suppression Method In Liquid NMR
36. The Study Of Automatic Analysis Model To The Size Distribution Of Piled Ore After Blowing Up
37. Simulation Study Of Residual Stress And Distortion Of Welding Bogie Frame In Speeding Up Freight
38. The Preparation,Characterization And Growing Mechanism Research Of The Cobalt Oxide Nanopowder Through Solid-state Reactions
39. The Design And Study Of Mining Method Under The Village For Aiyou Mine 106 Mining Area
40. PCI-BUS-Based Circular Saw-Blade Distortion Measure System
  <<First  <Prev  Next>  Last>>  Jump to