difficult-to-cut materials - Globe Thesis

Keyword [difficult-to-cut materials] Result: 21 - 34 \| Page: 2 of 2
21.	Study On Helical Milling Of Difficult-to-cut Materials Based On MQL
22.	Study On New Method And Tool Structure For Efficient Cutting Of Difficult-to-cut Materials
23.	Dedicated Cutting Tool Design And Research On Hole Quality For Orbital Drilling Of Aeronautical Difficult-to-cut Materials
24.	Theoretical And Experimental Investigations On Ultrasonic Vibration Assisted Turning Of Difficult-to-Cut Materials
25.	Blade Research For Difficult-To-Cut Materials-Research Carbide Blade Of Substrate Materials And Chip Breaker For Turning Austenitic Stainless Steel
26.	Elliptical Vibration-assisted Cutting Technology And Experimental Study For Difficult-to-cut Materials
27.	Investigation On Preparation And Performance Of AlCrN-based Coatings Using For Machining Of Difficult-to-cut Materials
28.	A Design Of Cooling System And Cutting Experiments For The Cryogenic Machining Of Difficult-to-Cut Materials
29.	Research On The Drilling Performance And Tool Wear Characteristics Of Difficult-to-cut Materials
30.	Research On The Adiabatic Shear And Plastic Deformation Of Difficult-to-cut Materials In Cutting Process
31.	Self-propelled rotary tool for turning difficult-to-cut materials
32.	Research On Key Technologies And Experimental For Difficult-to-Cut Materials Of Quasi-Intermittent Vibration-Assisted Cutting
33.	Research On High-Efficient EDM Milling For Aerospace Difficult-to-Cut Materials
34.	Development Of The Phase Change Heat Storage Super-hard Abrasive Grinding Wheel And Experimental Study On Dry Grinding
<<First <Prev Next> Last>> Jump to