deformation twinning - Globe Thesis

Keyword [deformation twinning] Result: 21 - 40 \| Page: 2 of 4
21.	{332}<113> Twinning Behavior And Evolution Of Twins During Solution Treatment In Beta Titanium Alloy
22.	Microstucture And Mechanical Properties Of Mocro-alloyed TWIP Steel
23.	Influence Of Deformation Rate On Deformation Behavior Of Magnesium Alloy And Research Of Detwinning
24.	Effect Of Thermomechanical Treatment And Torsion Deformation On Microstructure And Mechanical Properties Of Magnesium Alloy
25.	Study Of Microstructural Evolution And Atomic Structure Of High-purity Titanium During Dynamic Plastic Deformation
26.	Cryogenic Deformation Mechanism And Serration Behavior Of CoCrFeNi FCC High-entropy Alloys
27.	Deformation Twinning Of Low-symmetry Metal Titanium And Uranium
28.	Influence Of Different Deformation Modes On The Microstructure Characteristic And Mechanical Properties Of AZ31 Magnesium Alloy
29.	Study Of The Evolution Of Deformation Microstructure In Ti-25Nb-25Ta Biomedical Alloy By Electron Microscopy
30.	Influence Of The Content And The Mechanical Stability Of Austenite On The Tensile Properties Of Fe-15Cr-1Mo-0.4N-0.3C Stainless Steel
31.	Study On The Deformation Twinning Behavior In Magnesium Alloy
32.	Effect Of Microalloying On The Mechanical Properties And Microstructure Evolution Of Twinning-Induced Plastic (TWIP) Steels
33.	Study On The Stress Induced And Thermal Induced Microstructures Of Metastable Beta-type Ti Alloys
34.	Investigation On The Deformation,Damage And Fracture Of SiC Under Extreme Conditions
35.	Investigations On The Microstructure Formations And Evolutions During Machining Of Ti-6Al-4V
36.	Investigation Of Twinning Mechanism In AZ31B Magnesium Alloy During Plastic Deformation And Its Influence On Mechanical Behaviors
37.	Controlled Synthesis Oi Gold-based Platinum Group Noble-metal Nanoparticles And Study On Their Surface Defect-based Applications
38.	Research On The Deformation Twinning Mechanism Of High-strength And High-ductility Pure Titanium Prepared By Cryogenic Deformation
39.	On Influence Of Grain Size On Strength,Toughness And Strain Hardening Behavior Of A High Manganese Austenitic Cryogenic Steel
40.	Effects Of Intermediate And Post-annealing On The Mechanical Properties And Microstructure Of Constrained Groove Pressed Pure-Ti
<<First <Prev Next> Last>> Jump to