deformation simulation - Globe Thesis

Keyword [deformation simulation] Result: 21 - 38 \| Page: 2 of 2
21.	Research Onstraightening Process Parameters Of Φ3~Φ5mm Thin-superfine Tubes Straightening And The Dynamic Simulation Analysis
22.	Investigation On Microstructures And Mechanical Properties Of Mg-Sn-Zn-Cu Alloys And Numerical Simulation Of Hot Deformation
23.	Numerical Modeling And Experimental Study On Deformation Of Thin-walled Parts In Flank Milling
24.	Simulation And Experimental Verification Of Heterogeneous Plastic Deformation Of Disks In The Process Of High Pressure Torsion
25.	Study On Machining Deformation Simulation Technology Of Aluminum Alloy Thin-Wall Parts
26.	Research On Thermal Deformation Simulation And Orthogonal Coupling Modeling Of Horizontal Machining Center
27.	Yarn Pull-out Test For Studying The Impact Deformation Of Fabric
28.	Investigation On Curing Deformation Of Carbon Fiber Reinforced Resin Matrix Composites
29.	The Study On The Welding Deformation Simulation Method Of Large Scale Structure By Plastic Strain Mapping
30.	Study On Deformation And Compensation Of Ultra-thin Parts
31.	Investigations Of The Correlation Between Twinning And Mechanical Behavior Of AZ31 Magnesium Alloys
32.	Study On The Deformation And Strength Properties Of Municipal Solid Waste Incinerated Bottom Ash
33.	Investigation On Surface Cracking And Microstrcture Evolution Of Superheavy Forgings During Forging
34.	Finite Element Simulation And Process Optimization For Milling An Aerospace Engine Inlet
35.	Research And Development On LW135 Track Shoe
36.	Deformation Simulation And Process Optimization Of Sidewall Milling
37.	Phase-field simulation of dendritic growth under externally applied deformation
38.	Cutting Deformation Simulation Analysis And Process Optimization Of Aero-engine Combustor Casing
<<First <Prev Next> Last>> Jump to