Font Size:
a
A
A
Keyword [deform]
Result: 161 - 180 | Page: 9 of 10
161.
Change The Width Of The Disc Shears High Strength Steel Shear Research
162.
The Dosage Of 316 L Stainless Steel Hole Drilling Optimization Research
163.
7085 Aluminum Alloy Unidirectional Compression And Multidirectional Free Forging Deformation Experiment And Simulation
164.
Based On The Stress State Of Metal Material Deformation Behavior Research
165.
In 316 Ln Stainless Steel Dynamic And Static Recrystallization Deform Secondary Development Of The Model
166.
Based On Deform 3 D Inconel718 Nickel-based Alloy Cutting Simulation
167.
Based On Deform 3 D Analysis Of The Residual Stress Of Tc4 Titanium Alloy Cutting
168.
Blade Passivation Hss Tap Tapping Research
169.
Preparation Of Ultra-fine Grain Copper Strip By Large Strain Extrusion Machining
170.
Experimental Research And Numerical Calculation For T10Steel Quenched By Atmosphere-pressure High-velocity Nitrogen-water Spray
171.
Theoretical Research And Numerical Simulation On Rail Beam Blank Rolling
172.
Finite Element Analysis Of Turning Process Used With The Symmetric Dual-tools In Slender Shaft
173.
The Study On Evolutional Deform Mechanisms Of Boundary Pillar And Its Thickness Optimization Under Multi-factor
174.
Knotted The Knife Machine Design And Key Components Of The Reliability Analysis And Research
175.
The Manufacture Of TA2/Nicr Explosive Cladding Bar And The Interface Was Researched
176.
Study Of Numerical Simulation On Roll Bonding Process Of Titanium-7A52Aluminum Alloy Composite Sheets
177.
Metal Flow Study On Extrusion-spinning Technology Of Magnesium Alloy Cylindrical Pieces With Circinal Inner Ribs
178.
The Research On Drilling Temperature In Deep Hole Processing And Design Of Virtual Temperature Measuring Instrument
179.
The Simulation Study Of Machining Process And Residual Stress
180.
The Research On Distribution Of Milling Force And Milling Temperature In Wheel Groove Machining And Milling Insert Design
<<First
<Prev
Next>
Last>>
Jump to
