cycloid - Globe Thesis - Globe Thesis

Keyword [cycloid] Result: 1 - 20 \| Page: 1 of 2
1.	Modeling Methodology Of Milling Deflection And Flexible Milling Force For Tooth Profile Of Low-rigidity Cycloid Gear In High Speed Milling
2.	Development Of Numerical Control System For Machining Of Pockets In Automobile Synchronization Regulators Sleeve
3.	Study On Processing Device Used In Nutation Drive Cone Cycloid Teeth Cutting
4.	Study And Practice On The Cycloid Rotational Indexing Technology For Machining The Back-angled Shifterstops Of Automobile Synchronizer Sleeves
5.	A Study And Practice On The Machining Technology Of Cycloid Rotational Indexing
6.	A Study On Rotor Profile Of Oil-Free Screw Vacuum Pump Based On The Cycloid
7.	Machining Technology Improvement And Cutters Design Of Back Taper On Internal Spline
8.	Three-dimensional Parametric And Visual Design Of Cycloid Gear Hob
9.	Cycloid Bevel Gear Cutting Processing Technology Research Based On Four-axis Linkage
10.	Study On Lifting Performance Of Epicycloid Type PCP
11.	Research Of Key Technologies For High Efficiency And Low Cost Rough Machining Of Curved Tooth Bevel Gears
12.	Research On The Design And Cutting Performance Of Revolving Cycloid Milling Cutter And Circular Side Blade Milling Cutter
13.	Research On Turning And Milling Compound Machining Method Of Single Progressive Cavity Pump Rotor
14.	Parameter Control And Process Optimization Of 3D Cycloid-like Polishing Toolpath
15.	Research On The Tool Path Planning For Five-axis NC Machining Of Universal Cycloid Gear
16.	Development Of CAM System For Cycloid Gear Forming Grinding Based On NUM Flexium
17.	Control And Matching Of Grinding Tooth Profile Deviation Of Cycloidal Bevel Gears
18.	The Design And Manufacture Of Cycloid Milling Cutter And The Experimental Study
19.	Modeling And Experiments Of Material Remove Rate Research For Lapping Single Crystal SiC Wafer
20.	Design Of Composite Quartz Cycloidal Micro-Strain Actuator
<<First <Prev Next> Last>> Jump to