Font Size: a A A
Keyword [cutting force modeling]
Result: 21 - 40 | Page: 2 of 3
21. Cutting Force Modeling Based On Oblique Cutting Model In Hard-machined Material Curved Cutting Process And Cutting Parameters Optimization
22. Elliptical Vibration-assisted Cutting Technology And Experimental Study For Difficult-to-cut Materials
23. Research On Geometric Modeling And Stability Of Cutting Force In Five-axis Machining Of Toroidal Cutter
24. Cutting Force Modeling Simulation And Experimental Study Of Linear Fly Cutting Process
25. The Cutting Force Modeling And Control Of SiC Monocrystal Wafer Processing
26. Research On Quality Optimization Of Hybrid Robot Based Helical Milling For Titanium Alloy/CFRP Stacks Structure
27. Simulation And Experimental Research Of Cutting Force Modeling And Analysis Based On Wire Saw Topography
28. Research On Quasi Intermittent Vibration Assisted Swing Turning Cutting Force And Tool-chip Friction Characteristics
29. Research On Cutting Force Modeling In Precision Turning And Elliptical Vibration Turning Process Of Pure Iron Components
30. Research On Mechanism And Device Of Ultrasonic Assisted Micropore Drilling
31. Cutting Force Modeling Of Five-axis NC Machining By Fillet-end Milling Cutter
32. Cutting force modeling and optimization in three-dimensional plane surface machining
33. Tool cutting force modeling and wear estimation of micro-end-milling operations
34. Multi-Objective Optimization Of Cutting Parameters Of SiCp/Al Composite Based On Low Energy Consumption
35. Research On Key Technologies And Experimental For Difficult-to-Cut Materials Of Quasi-Intermittent Vibration-Assisted Cutting
36. Research On Mechanism Of Trochoidal Milling And Tool Path Planning Of The Blisk
37. Modeling Of Cutting Force And Analysis In Helical Milling Of CFRP With Ball End Milling Cutter
38. Research On Cutting Force Modeling And Surface Quality Of Glass Materials In Ultrasonic Assisted Grinding
39. Research On Cutting Mechanism And Tool Design Technology Of CFRP Ultrasonic Assisted Bidirectional Progressive Hole Milling
40. Analysis And Compensation Of Slender Cutter Deflection On Machining Error Of Mould Surface
  <<First  <Prev  Next>  Last>>  Jump to