Font Size: a A A
Keyword [cutting experiment]
Result: 21 - 40 | Page: 2 of 3
21. Finite Element Simulation For The Cutting Process Of Titanium Alloy And Superalloy
22. Used Of Finite Element Simulation To Study The Cutting Performance Of Si3N4 Ceramic Tools And Optimization Of Cutting Parameters By Genetic Algorithm
23. Simulation Research And Optimum Design Of Chip Breaking Of Translatable Grooved Blade
24. Finite Element Simulation And Cutting Experiment Of TiAlN / B C / CBN Multilayer Coated Blade High Speed ​​Hard Cutting
25. The Research And Analysis Of Spiral Bevel Gear Cutting Experiment And Tool Design
26. Preparation Of Ti-Si-C Coated Tool And The Evaluation Of Its Cutting Performance
27. The Cutting Experiment And Wear Mechanism Of Nano-modified Al2O3-TiB2-CaF2 Self-lubricating Ceramic Tools
28. The Research For Cutting Technology Of Carbon Fiber Reinforced Composite Bridge Plug
29. Design And Control Of Single Degree Of Freeform Fast Tool Servo Apparatus Based On NI Controller
30. Research On Formation Mechanism And Control Method Of Surface Defects In Cutting Of SiCp/Al Composites
31. Research On Cuttability Of Coal Based On Single Pick Cutting Experiment
32. Research On Processing Method Of Large Cycloidal Bevel Gear
33. Study On The Surface Quality Analysis And Process Parameter Optimization Of KDP Crystal Single Point Diamond Cutting
34. Research On Mechanical Properties And Experimental Of Active Excitation Auxiliary Cutting Experimental Table
35. Research On The Adiabatic Shear And Plastic Deformation Of Difficult-to-cut Materials In Cutting Process
36. Design Of Force Sensing Fast Tool Servo System And Its Verification Through Cutting Experiment
37. Study On Ductile-brittle Transition Energy-based Model Of Single Crystal Silicon With Ultrasonic Vibration Cutting Method
38. Experimental And Numerical Study On Rock Cutting By Conical Picks Of Roadheader
39. Research On Multi-scale Single Diamond Grit Cutting Simulation Of SiCp/Al Composites And Experimental Verification
40. Simulation And Experimental Research Of Laser Cladding Ni60-WC On High-speed Steel Tool
  <<First  <Prev  Next>  Last>>  Jump to